We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
POWER FIRST 10 AWG bare copper pin terminal, tin finish, crimp barrel

POWER FIRST

POWER FIRST 5UGP8 Pin Terminal 10 AWG 600 V Bare Crimp

SKU CH-R2W5-0J816

A 10 AWG bare copper pin terminal rated 600 V with a brazed seam for crimp termination

  • TypeElectrical Connectors
  • 10 AWG crimp pin terminal rated for 600 V
  • Brazed seam barrel resists pull-out under vibration
  • Tin-plated copper pin handles 302 °F continuous
  • UL/cUL listed E96029 for code-compliant installs
  • Bare barrel accepts 12–10 AWG solid or stranded wire

10 AWG Pin Terminal for Crimp Wiring

This POWER FIRST pin terminal accepts 10 to 12 AWG conductors and terminates with a crimp barrel. It is intended for installers and maintenance technicians who need a bare copper contact rated to 600 V in control panels, machinery or automotive harnesses.

Replaces worn or undersized pin contacts

The jump is worth it when existing terminals show heat discoloration, loose crimps or voltage-drop issues at high current. The brazed seam and tin-plated copper barrel restore a low-resistance path without changing wire gauge or connector housing.

Handles continuous loads up to the 600 V rating

The 0.134 in barrel inside diameter and 0.236 in barrel length give solid mechanical grip on 10 AWG stranded wire. Headroom ends at the 302 °F temperature limit or when wire size exceeds 10 AWG, requiring a larger terminal series.

Highlights

  • 10 AWG crimp pin terminal rated for 600 V
  • Brazed seam barrel resists pull-out under vibration
  • Tin-plated copper pin handles 302 °F continuous
  • UL/cUL listed E96029 for code-compliant installs
  • Bare barrel accepts 12–10 AWG solid or stranded wire

Specifications

BrandPOWER FIRST
TypeElectrical Connectors

Questions about this item

What crimp tool works with the .134 in barrel inside diameter and 10 AWG maximum wire size?

Use a crimper rated for 10 AWG non-insulated terminals with a die that matches the .134 in barrel inside diameter and .22 in outside diameter to form a solid connection.

How do I avoid a loose crimp on the 0.551 in pin length?

Strip the wire so the conductor reaches the barrel end, seat it fully in the .236 in barrel length, then crimp once with the correct die; do not re-crimp or solder the joint.

When should I replace a terminal rated for 302 Degrees F and 600 V?

Replace it if the tin plating shows corrosion, the copper barrel is cracked or overheated, or the pin no longer fits tightly in the mating connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.