We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 3 ft cord adapter with L14-30P plug and L5-20R connector

POWER FIRST

POWER FIRST 4FZZ5 Cord Adapter L14-30P to L5-20R 3 ft Yellow

SKU CH-M0FE-MJNPD

Converts a NEMA L14-30P plug to two NEMA L5-20R outlets with a 3 ft yellow PVC cord rated for 20 A at 125 V AC

  • TypeWire & Cable
  • Connects 30 A generator plug to 20 A tool outlet
  • 10 AWG copper handles up to 3,750 W continuous load
  • PVC jacket stays flexible from -58 °F to 194 °F
  • UL/CUL listed for safe job-site power distribution
  • Bright yellow 3 ft cord resists abrasion and stays visible

POWER FIRST L14-30P to L5-20R Adapter

This cord adapter connects a NEMA L14-30P plug to a NEMA L5-20R receptacle. It provides a 3 ft yellow PVC-jacketed cable rated for 125V AC and up to 20 A continuous current. The unit uses 10 AWG conductors and carries UL/CUL certification. It suits temporary power distribution in workshops, job sites or generator hook-ups.

Verify Plug, Receptacle and Circuit Rating

Confirm that your source outlet matches the L14-30P configuration and that the load does not exceed 20 A or 3 750 W. The cord is rated for temperatures from -58 °F to 194 °F, so ensure the operating environment stays within this range. Check that the 3 ft length reaches your equipment without strain or tripping hazard.

California Proposition 65 Notice Applies

The product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. No additional accessories, software or mounting hardware are included in the package. The adapter is ready for immediate use once compatibility and safety conditions are verified.

Highlights

  • Connects 30 A generator plug to 20 A tool outlet
  • 10 AWG copper handles up to 3,750 W continuous load
  • PVC jacket stays flexible from -58 °F to 194 °F
  • UL/CUL listed for safe job-site power distribution
  • Bright yellow 3 ft cord resists abrasion and stays visible

Specifications

BrandPOWER FIRST
TypeWire & Cable

Questions about this item

What comes in the box with this POWER FIRST 4FZZ5 cord adapter and is anything else needed?

The adapter ships as a single 3 ft cord with a NEMA L14-30P plug on one end and two NEMA L5-20R outlets on the other; no extra parts are required for basic use.

Should I choose the 20 A version or a different capacity for my 30 A generator inlet?

The connector is rated 20 A at 125 V AC with a 3 750 W maximum, so it suits loads up to 20 A per outlet while the L14-30P plug fits a 30 A source.

What does the 3 750 W rating mean when I plug tools into the two L5-20R outlets?

It is the total combined power limit for both outlets; the 10 AWG cord and PVC jacket are rated from -58 °F to 194 °F and carry UL/CUL listing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.