POWER-FENG
POWER-FENG 57.48Wh AP18E8M battery for Acer Nitro 5
A 57.48 Wh lithium-polymer replacement battery compatible with multiple Acer Nitro 5 models
- TypeBattery
- Battery TypeLaptop Batteries
- Li-polymer chemistry delivers 57.48 Wh capacity
- 4 V output matches original Acer specifications
- 3733 mAh rating supports extended unplugged sessions
- Compatible with AN515-52 AN515-54 AN515-55 AN515-43 models
- Replaces AP18E8M and AP18E7M part numbers
Replacement battery for Acer Nitro 5
This 57.48Wh lithium-polymer pack is built for Acer Nitro 5 models including AN515-52, AN515-54, AN515-55 and AN515-43. It also fits Shadow Knight 4, N18C3 and several related Acer chassis. The 15.4V unit restores original runtime for daily work and gaming sessions.
Black Li-polymer housing with direct-fit connectors
The black polymer casing matches the factory battery dimensions and uses the existing latch points, so no tools or adapters are required. Connectors align with the motherboard header on supported models such as AN517-51, AN715-51, A715-74 and A715-74G. A straight swap returns the laptop to mobile use in minutes.
57.48Wh capacity at 15.4V decides fit
The 3733mAh rating at 15.4V must match the original specification printed on your old pack; if the label shows a different voltage or watt-hour value this unit will not work. Buyers needing a higher-capacity pack or a different voltage for other Acer series should look elsewhere.
Highlights
- Li-polymer chemistry delivers 57.48 Wh capacity
- 4 V output matches original Acer specifications
- 3733 mAh rating supports extended unplugged sessions
- Compatible with AN515-52 AN515-54 AN515-55 AN515-43 models
- Replaces AP18E8M and AP18E7M part numbers
Specifications
| Type | Battery |
|---|---|
| Battery Type | Laptop Batteries |
Questions about this item
What voltage does the 57.48Wh AP18E8M battery deliver to the Acer Nitro 5?
The battery operates at 15.4V, matching the original specification for compatible Nitro 5 models.
Which screw-hole pattern or chassis does the AP18E8M fit inside the Nitro 5?
It is shaped for the AN515-52, AN515-54, AN515-55, AN515-43 and other listed Nitro 5 chassis, aligning with the factory mounting points.
What is the first step when installing the AP18E8M, and what do people often skip?
Disconnect the old battery connector from the motherboard before removing screws; many forget to unplug it first and risk a short.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



