Pomona Electronics
Pomona Electronics 3925-02 Mini Test Clip, Black/Red, 5A, 60VDC
A pair of gold-plated minigrabber test clips rated for 5 A and 60 VDC with 0.09 in wire capacity
- TypeAssortments & Kits
- Gold-plated beryllium-copper contacts ensure low-resistance connections
- Rated 5 A at 60 VDC for safe low-voltage testing
- Stainless-steel spring maintains firm grip over repeated use
- Nylon insulation protects against shorts up to 300 V
- Compact 2 3/8 in length fits tight test points
Mini Test Clip Pair
The Pomona Electronics 3925-02 provides one pair of Minigrabber test clips in black and red for quick, secure connections to component leads or test points. Rated for 5 A at 60 VDC, they suit low-voltage signal probing and bench troubleshooting. Gold-plated beryllium copper contacts deliver low-resistance contact while the nylon-insulated bodies protect against accidental shorts. The compact 2 3/8 in length keeps dense boards accessible.
Check Your Setup
Verify that the circuit under test stays within the 60 VDC and 5 A limits marked on the clips. Ensure the test points or leads accept a .09 in wire-size jaw opening so the spring-loaded stainless steel jaws can grip firmly. Confirm the operating environment remains below 216 °F to avoid insulation degradation. The gold-plated finish resists oxidation but inspect contacts for contamination before each use.
Build Integration
The clips connect directly to oscilloscope probes, multimeter leads or flying leads using their standard banana-compatible rear terminals. Their miniature profile frees space around crowded pins on dense PCBs where larger clips cannot fit. The red and black colour coding simplifies polarity identification during differential measurements. No external power or adapters are required; the clips are passive accessories that complement existing bench instruments.
Highlights
- Gold-plated beryllium-copper contacts ensure low-resistance connections
- Rated 5 A at 60 VDC for safe low-voltage testing
- Stainless-steel spring maintains firm grip over repeated use
- Nylon insulation protects against shorts up to 300 V
- Compact 2 3/8 in length fits tight test points
Specifications
| Brand | POMONA |
|---|---|
| Type | Assortments & Kits |
Questions about this item
What comes with the Pomona 3925-02 and what must be purchased separately?
The package includes one pair of red and black Minigrabber test clips with gold-plated beryllium copper contacts and nylon insulation. Test leads, probes or adapters are not included and must be bought separately.
How do I choose between the red and black clips in the 3925-02 kit?
The kit supplies one red and one black clip together; they are electrically identical at 5 A and 300 V maximum, so you simply use red for positive and black for negative or ground connections.
What does the 5 A rating mean when I clip the 3925-02 onto a live circuit?
The 5 A rating is the maximum continuous current the gold-plated beryllium copper contact can carry without overheating, provided the ambient temperature stays below 216 °F and the wire used is 0.09 in or smaller.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
