We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red mini hook test clip with banana plug and 5 ft PVC lead

Pomona Electronics

Pomona Electronics 3782-60-2 Mini Hook Test Clip

SKU CH-F43Z-K0EGF

A red test lead with banana plug and mini hook clip, rated 300 V and 5 A, 5 ft PVC-insulated 20 AWG wire, CE marked

  • TypeTest Probes & Leads
  • Mini hook clip grabs small test points securely
  • 5 ft lead gives comfortable bench reach
  • 300 V rating covers low-voltage circuits
  • 5 A capacity handles typical signal currents
  • CE mark confirms basic safety compliance

Purpose & User

This Pomona Electronics mini hook test clip connects to a single red test lead for low-voltage bench or automotive measurements. It suits technicians and hobbyists who need a compact grabber that terminates in a standard banana plug for direct meter attachment.

Capacity & Headroom

The lead carries up to 5 A at 300 V across its 5 ft length with 20 AWG PVC insulation rated to 131 °F. Beyond that current or voltage the clip and wire exceed their rated limits and the insulation may degrade, so higher-power circuits are outside its safe operating range.

Interface Limits

The banana plug end measures 0.087 in and fits standard 4 mm meter jacks; it will not seat in smaller proprietary sockets or high-density connectors. The single-lead design provides one measurement path only, so differential or multi-point testing requires additional leads.

Highlights

  • Mini hook clip grabs small test points securely
  • 5 ft lead gives comfortable bench reach
  • 300 V rating covers low-voltage circuits
  • 5 A capacity handles typical signal currents
  • CE mark confirms basic safety compliance

Specifications

BrandPOMONA
TypeTest Probes & Leads

Questions about this item

Will the 0.087 in banana plug fit the 4 mm jacks on my older multimeter?

The 0.087 inch banana plug is sized for standard 4 mm jacks, so it will connect securely to the inputs on your existing multimeter.

How can I confirm the 300 V rating is holding up after I wire the clip?

Apply a known low-voltage source and verify the meter reads correctly; the red PVC insulation and CE marking indicate the lead meets the stated 300 V maximum.

Does the package include the minigrabber clip and banana plug, or must I buy the clip separately?

The set ships with the red banana plug and minigrabber clip already assembled on the 5 ft, 20 AWG PVC lead; no extra parts are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.