We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75mm ABS filament spool in vacuum-sealed bag with desiccant, cardboard spool visible

Polymaker PolyLite ABS Filament 1.75mm 1kg Black PE01001

SKU CH-E7VT-79BYM

1.75 mm ABS filament on a recycled cardboard spool, vacuum-sealed with desiccant for moisture-free printing at 245–265 °C

  • Color111 - 1.75mm Black (Hex Code: #16161a)
  • MaterialAcrylonitrile Butadiene Styrene
  • Diameter1.75
  • Weight1 kilograms
  • Impact and heat resistant for functional parts with 104°C Vicat softening temperature
  • Lower volatile content than traditional ABS for enhanced printing stability
  • Vacuum-sealed resealable bag with desiccant keeps filament moisture-free
  • Fully recycled cardboard spool and box in upgraded 3.0 packaging
  • Print temperature 245-265°C with 30-50mm/s speed for reliable results

Polymaker PolyLite ABS 1.75mm 1kg Filament

This 1.75mm diameter ABS filament comes on a 1kg recycled cardboard spool. It is made for makers printing functional parts that need impact resistance and heat resistance up to a Vicat softening temperature of 104°C. The material uses a specialty bulk-polymerized resin with lower volatile content than traditional ABS.

Print Temperature and Warping Limits

The recommended nozzle temperature range is 245-265°C with a heated bed at 90-100°C. Print speed should stay between 30-50mm/s. Larger parts are more susceptible to warping on home printers and the odor during printing is stronger than with PLA. For outdoor applications requiring UV resistance, the manufacturer recommends ASA filament instead.

Installation and Common Issues

The filament ships vacuum-sealed with desiccant in a resealable bag to stay moisture-free. Always pass the filament through the fixed spool hole after use to avoid tangling. A heated bed and suitable printing surface are necessary to prevent warping. Using a raft or brim, or slowing down the first layer, can help minimize warping issues.

Highlights

  • Impact and heat resistant for functional parts with 104°C Vicat softening temperature
  • Lower volatile content than traditional ABS for enhanced printing stability
  • Vacuum-sealed resealable bag with desiccant keeps filament moisture-free
  • Fully recycled cardboard spool and box in upgraded 3.0 packaging
  • Print temperature 245-265°C with 30-50mm/s speed for reliable results

Specifications

BrandPolymaker
ModelPE01001
Color111 - 1.75mm Black (Hex Code: #16161a)
MaterialAcrylonitrile Butadiene Styrene
Diameter1.75
Weight1 kilograms

Questions about this item

Should I pick the 1.75 mm 1 kg spool or is there another diameter option?

This listing is the 1.75 mm diameter on a 1 kg cardboard spool; no other diameters are offered for this model.

What does the 104 °C Vicat softening temperature mean for my finished parts?

Parts keep their shape up to about 104 °C, so they withstand hot car interiors or functional prototypes that see real heat.

My printer maxes out at 260 °C nozzle — will the 245–265 °C range work?

Yes, the lower half of the range (245–260 °C) fits your hot-end; print at 30–50 mm/s with a 90–100 °C bed for best adhesion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.