We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of matte charcoal black PLA filament 1.75mm 1kg

Polymaker Panchroma Matte PLA Filament 1.75mm 1kg Charcoal Black

SKU CH-BNCJ-36G39

Matte charcoal-black PLA filament in 1.75 mm diameter on a 1 kg spool prints at 190–230 °C nozzle and 25–60 °C bed up to 300 mm/s with low-gloss finish that hides layer lines

  • ColorMatte Charcoal Black
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Warp-free printing with strong adhesion to PEI and glass beds
  • Natural low-gloss finish hides layer lines for a smooth matte look
  • Neat winding prevents tangles and clogs for reliable long prints
  • High-speed capability up to 300 mm/s at 190-230 °C nozzle temperature
  • Beginner-friendly PLA works with standard profiles right out of the box

Panchroma Matte PLA for Home Decor

Polymaker Panchroma Matte PLA Filament delivers a non-reflective Charcoal Black finish that hides layer lines on decorative prints such as vases, desk organisers and cosplay props. The matte surface looks smooth straight off the build plate with minimal post-processing required.

Check Nozzle and Bed Temperature Range

Verify that your FDM printer can reach a nozzle temperature between 190 and 230°C and a heated bed between 25 and 60°C. The 1.75 mm diameter must match your extruder specification, and the spool should fit your printer's filament holder or an external mount.

Neat Winding Enables Unattended Runs

The spool is wound to prevent tangles, reducing the risk of nozzle clogs during long or overnight prints. This consistency supports reliable high-speed printing up to 300 mm/s and works with standard PLA slicer profiles for hassle-free batch jobs.

Highlights

  • Warp-free printing with strong adhesion to PEI and glass beds
  • Natural low-gloss finish hides layer lines for a smooth matte look
  • Neat winding prevents tangles and clogs for reliable long prints
  • High-speed capability up to 300 mm/s at 190-230 °C nozzle temperature
  • Beginner-friendly PLA works with standard profiles right out of the box

Specifications

BrandPolymaker
ModelCA04015
ColorMatte Charcoal Black
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Does the 1 kg spool include everything needed to start printing, or must I buy a spool holder or adapter separately?

The 1 kg spool of 1.75 mm filament is ready to load on most FDM printers; no extra holder or adapter is required unless your machine uses a non-standard mounting system.

Why choose the Charcoal Black 1 kg spool instead of another colour or weight?

Charcoal Black gives a neutral, non-reflective matte finish that hides layer lines well, and the 1 kg spool suits both occasional prints and longer batch jobs without frequent changes.

What does the 300 mm/s high-speed rating mean for everyday prints on my printer?

It means the filament can sustain smooth extrusion at speeds up to 300 mm/s when the nozzle runs at 190–230 °C and the bed at 25–60 °C, cutting print time on compatible machines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.