POLYMAKER 70820 Panchroma Matte PLA Filament Charcoal Black 1.75mm 1kg
Matte PLA filament in charcoal black, 1.75 mm diameter on a 1 kg recycled cardboard spool, vacuum-sealed with desiccant for tangle-free, moisture-free printing and easy support removal
- Color111 - 1.75mm Matte Charcoal Black (Hex Code: #2f2e30)
- MaterialPolylactic Acid
- Diameter1.75
- Weight1 kilograms
- Matte finish hides layer lines for a smooth look
- Less brittle than standard PLA for easier handling
- Tangle-free winding and vacuum-sealed bag keep filament ready
- Easy breakaway supports save post-processing time
- Fully recycled cardboard spool reduces packaging waste
Panchroma Matte PLA Charcoal Black 1.75 mm
This filament is a Polylactic Acid material sold under the Panchroma Matte PLA line by Polymaker. It comes as a 1 kilogram spool with a 1.75 millimetre diameter in Charcoal Black colour 111. The matte surface finish hides layer lines and the formulation provides good ductility with less brittleness than standard PLA. Supports are designed for easy breakaway removal.
Makers who want a matte look
The product suits hobbyists and professionals seeking a low-sheen finish on printed parts without post-processing. Builders who need high heat resistance above 60 °C bed temperature or specialised engineering-grade materials should look at something else. The cardboard spool is fully recycled and the filament is vacuum sealed with desiccant to prevent moisture uptake.
1.75 mm diameter and 1 kg net weight
The critical specification is the 1.75 millimetre filament diameter, which must match the extruder and hot-end of the 3D printer. The spool net weight is 1 kilogram, providing a known amount of material for project planning. Recommended nozzle temperature range is 190 to 230 °C and bed temperature range is 25 to 60 °C.
Highlights
- Matte finish hides layer lines for a smooth look
- Less brittle than standard PLA for easier handling
- Tangle-free winding and vacuum-sealed bag keep filament ready
- Easy breakaway supports save post-processing time
- Fully recycled cardboard spool reduces packaging waste
Specifications
| Brand | POLYMAKER |
|---|---|
| Model | 70820 |
| Color | 111 - 1.75mm Matte Charcoal Black (Hex Code: #2f2e30) |
| Material | Polylactic Acid |
| Diameter | 1.75 |
| Weight | 1 kilograms |
Questions about this item
What spool size and filament diameter does the 1 kg Panchroma Matte PLA Charcoal Black use?
It comes on a cardboard spool and the filament diameter is 1.75 mm.
What nozzle and bed temperatures should I set for the first print with this 70820 Matte PLA?
Start at 190–230 °C nozzle and 25–60 °C bed; the common mistake is printing too hot, which reduces the matte effect.
How should I store the filament after opening the vacuum-sealed bag to keep it dry and tangle-free?
Reseal the ziplock bag with the desiccant inside and thread the loose end through the spool’s fixed hole to prevent tangles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
