Polyken
Polyken 105C Double-Sided Carpet Tape 2 in x 36 yd Natural
Double-sided cloth carpet tape with rubber adhesive holds securely on polyethylene surfaces from 40 to 200 degrees Fahrenheit
- TypeDouble Sided Tape
- ColorBeige
- Strong hold on carpet with 40 oz/in adhesion
- Withstands heat up to 200 Degrees F
- Cloth backing resists tears during installation
- 36 yard roll covers large areas
- Low-density polyethylene liner peels cleanly
Double-Sided Carpet Tape 105C
Polyken 105C is a double-sided carpet mounting tape supplied on a continuous roll with a 3-inch core. The cloth backing carries a rubber adhesive protected by a low-density polyethylene film liner. It is intended for indoor mounting on polyethylene surfaces in aviation, construction and general-purpose applications.
Sustained Load Behaviour
The rubber adhesive maintains its bond across a service range of 40 to 200 degrees Fahrenheit. Adhesion to steel measures 40 oz/in, indicating consistent holding power under prolonged stress rather than only initial tack. The 11 mil thickness provides a stable bond line that resists creep during extended indoor use.
Practical Interface Limits
The tape width is 1 7/8 inches and the roll length is 36 1/16 yards, defining the maximum continuous run available from a single roll. The kraft paper release liner must be removed before application, and the product is rated for indoor use only. No outdoor or high-temperature service beyond 200 degrees Fahrenheit is supported.
Highlights
- Strong hold on carpet with 40 oz/in adhesion
- Withstands heat up to 200 Degrees F
- Cloth backing resists tears during installation
- 36 yard roll covers large areas
- Low-density polyethylene liner peels cleanly
Specifications
| Type | Double Sided Tape |
|---|---|
| Brand | Polyken |
| Color | Beige |
Questions about this item
How much heat can the 105C tape withstand when installed near a heat source that runs all day?
The tape is rated for continuous performance up to 200 degrees F, so it remains stable near sustained heat sources within that limit.
What surface preparation is required before applying the 105C tape to a concrete subfloor?
The surface must be clean, dry and free of dust or oil; the rubber adhesive bonds to polyethylene and similar substrates without primer.
Will the 11 mil thickness of the 105C tape create a noticeable ridge under an existing low-pile carpet?
At 11 mil the tape adds minimal height; most low-pile carpets conceal it without a visible seam or tripping hazard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Zoro Select Probe Covers 15-617-000 PK500 Transparent
- Transparent
HealthSmart 18-220-000 Infrared Digital Thermometer Gray/White
- Gray/White
HealthSmart Foods, Inc. 04-655-001 Digital Blood Pressure Monitor Arm Adult Black
- Black



