Polaris Vision Tap
Polaris Vision Tap IPL4-3CB Multitap Connector Aluminum Clear Hex 3-Port
Aluminum multitap connector with three ports accepts stranded copper wire from 14 to 4 AWG at up to 600 volts
- Connects copper and aluminium conductors
- Handles wire sizes from 14 AWG to 4 AWG
- Rated for 600 V and 194 °F operation
- cULus listed to UL 486A and UL 486B standards
- Three-port hex design with plastisol insulation
Three-port aluminium multitap connector
This Polaris IPL4-3CB multitap connector provides three ports in a clear plastisol-insulated aluminium body. It accepts stranded copper conductors from 14 AWG to 4 AWG and is secured with a 1/8 in hex drive. The connector is rated for 600 V and a maximum operating temperature of 194 Degrees F. It meets cULus, UL 486A and UL 486B standards and is RoHS compliant.
Verify wire gauge and hex tool before ordering
Confirm that your stranded copper conductors fall within the 14 to 4 AWG range specified for this connector. Ensure you have a 1/8 in hex driver available for tightening the set screws. Check that the 600 V rating and 194 Degrees F temperature limit suit the circuit you are working on. The clear plastisol insulation allows visual confirmation of wire insertion depth.
Integrates into panel or junction-box builds
The three-port layout lets you join or branch up to three conductors in a single aluminium body, reducing the need for separate splice blocks. Its compact hex-drive design fits in tight enclosures where larger lever connectors cannot reach. The UL-listed construction supports code-compliant installations in residential or commercial wiring projects. RoHS compliance satisfies restricted-substance requirements for regulated environments.
Highlights
- Connects copper and aluminium conductors
- Handles wire sizes from 14 AWG to 4 AWG
- Rated for 600 V and 194 °F operation
- cULus listed to UL 486A and UL 486B standards
- Three-port hex design with plastisol insulation
Specifications
| Brand | POLARIS |
|---|
Questions about this item
What conductors are included with the IPL4-3CB and what must I supply?
The connector body and plastisol insulation are supplied. You must provide stranded copper or aluminum wire between 14 AWG and 4 AWG for the three ports.
How do I decide which wire size to use with the three ports?
Choose any stranded copper or aluminum conductor from 14 AWG up to 4 AWG; each port accepts the same range so match the wire to your circuit ampacity.
What does the 600 V rating mean when the connector is installed?
It indicates the connector is tested for continuous use in circuits up to 600 volts, within the 194 degrees F temperature limit and cULus listed standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
