We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black insulated aluminium multitap connector, three ports, 3.52 in long

Polaris nsi

Polaris nsi IPLD350-3B Insulated Multitap Connector 3.52 In

SKU CH-4R5N-N98ZQ

Insulated three-port multitap connector joins aluminium or copper conductors up to 350 kcmil at 600 V

  • TypeMulti-Tap
  • Three-port design simplifies multi-wire connections
  • Plastisol insulation protects up to 194 degrees Fahrenheit
  • Aluminium body accepts copper or aluminium conductors
  • Hex-head screws tighten with standard 5/16 inch tool
  • cULus and UL 486A listed for 600 volt service

Three-Port Aluminium Multitap

The Polaris IPLD350-3B is a 3.52 in insulated multitap connector with three ports. It accepts stranded copper conductors from 6 AWG up to 350 kcmil. The aluminium body is coated in black Plastisol insulation rated to 194 Degrees F and 600 V.

Suits three-way aluminium or copper splices

Installers joining three large-gauge cables in a single block will find this connector appropriate. It is not for circuits requiring more than three ports, nor for solid conductors or wire sizes outside the 6 AWG to 350 kcmil range.

Check conductor size and voltage before ordering

Verify that each cable falls within the stated AWG and kcmil limits and that the system voltage does not exceed 600 V. Confirm the 5/16 in hex tool is available for the set-screw heads and that the operating temperature stays below 194 Degrees F.

Highlights

  • Three-port design simplifies multi-wire connections
  • Plastisol insulation protects up to 194 degrees Fahrenheit
  • Aluminium body accepts copper or aluminium conductors
  • Hex-head screws tighten with standard 5/16 inch tool
  • cULus and UL 486A listed for 600 volt service

Specifications

BrandPolaris
TypeMulti-Tap

Questions about this item

What conductor sizes does the 350 kcmil maximum port accept?

The connector accepts stranded copper from 6 AWG up to 350 kcmil and also works with aluminium conductors in the same range.

Will the 5/16 in hex head fit my existing torque wrench?

Yes, the 5/16 in hex head is a standard size that fits common torque wrenches and drivers used for electrical terminations.

How can I confirm the 600 V rating is intact after installation?

Verify that the plastisol insulation fully covers each port, the connector body shows no cracks, and the hex screws are torqued to the manufacturer's specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.