We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastisol-insulated aluminium multitap connector, 3.43 in long, four ports, hex head

Polaris nsi

Polaris nsi IPLD3/0-4B Insulated Multitap Connector 3.43 In

SKU CH-MX99-PR2GK

Four-port insulated multitap connector accepts 6 AWG to 3/0 AWG copper or aluminum conductors at up to 600 V and 194 °F

  • TypeMulti-Tap
  • Connects four conductors in one compact block
  • Plastisol insulation protects up to 194 °F operating temperature
  • Rated for 600 V across aluminum and copper wires
  • cULus and UL 486A listed for code compliance
  • RoHS compliant with no UL 94 rating required

Insulated Multitap Connector 3.43 In

The Polaris nsi IPLD3/0-4B is an insulated multitap connector designed for joining aluminum or copper conductors in electrical installations. It provides four ports for splicing or tapping wires in industrial, automotive or commercial wiring projects.

Four Ports and Plastisol Insulation

The connector body is aluminium with a black plastisol finish that serves as the insulation material. Four ports accept stranded copper conductors from 6 AWG up to 3/0 AWG and are secured using a 1/4 in hex drive. The assembly is rated for 600 V and a maximum operating temperature of 194 Degrees F.

Verify Conductor Range and Clearance

Confirm that your conductors fall within the 6 AWG to 3/0 AWG stranded copper range and that the 3.43 in length fits the available space in your enclosure or junction box. The 1/4 in hex tool requirement and 600 V rating should also match your installation specifications.

Highlights

  • Connects four conductors in one compact block
  • Plastisol insulation protects up to 194 °F operating temperature
  • Rated for 600 V across aluminum and copper wires
  • cULus and UL 486A listed for code compliance
  • RoHS compliant with no UL 94 rating required

Specifications

BrandPolaris
TypeMulti-Tap

Questions about this item

Will the hex-head set screws need periodic re-torquing after installation?

The connector uses a 1/4 in hex head for each port; once tightened to the manufacturer's recommended torque no routine re-torquing is required unless the installation is disturbed.

What is the first thermal limit reached under continuous maximum load?

The Plastisol insulation is rated to a maximum operating temperature of 194 Degrees F, so sustained current that pushes the connector body past that point would be the limiting factor.

Does the Plastisol insulation stay cool enough for enclosed panel use when running all day?

With a 194 Degrees F temperature rating and no forced-air requirement, the connector is designed to operate continuously inside enclosed panels without exceeding its thermal limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.