We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastisol-insulated aluminum multitap connector, 3.85 inches long, four ports, hex head

Polaris nsi

Polaris nsi IPLD250-4B Insulated Multitap Connector 3.85 In. L

SKU CH-8Q9Y-993KY

Insulated four-port multitap connector accepts 6 AWG to 250 kcmil stranded copper or aluminium wire, rated 600 V and 194 °F, 3.85 in long

  • TypeMulti-Tap
  • Insulated body protects connections up to 600 V
  • Four ports accept aluminium or copper from 6 AWG to 250 kcmil
  • Plastisol finish rated for 194 °F continuous use
  • Hex-head screws tighten with standard 5/16 in driver
  • cULus listed to UL 486A and RoHS compliant

Four-port insulated multitap connector

This Polaris multitap connector joins up to four conductors in a single insulated body. It accepts stranded copper or aluminum wire from 6 AWG up to 250 kcmil per port. The 3.85-inch length fits standard panel layouts for industrial and automotive wiring jobs. Rated for 600 volts and 194 degrees F maximum operating temperature.

Hex-drive termination for secure installation

Each of the four ports uses a 5/16-inch hex set screw to clamp the conductor. The hex head allows controlled torque with a standard driver, reducing the risk of loose connections under vibration. Aluminum body with plastisol finish provides insulation and corrosion resistance for copper and aluminum conductors alike.

cULus listed with plastisol insulation

The connector carries cULus certification to UL 486A and meets RoHS requirements. Plastisol insulation covers the body, eliminating the need for separate tape or heat-shrink in most installations. Operating temperature ceiling of 194 degrees F supports continuous load in engine compartments and equipment cabinets.

Highlights

  • Insulated body protects connections up to 600 V
  • Four ports accept aluminium or copper from 6 AWG to 250 kcmil
  • Plastisol finish rated for 194 °F continuous use
  • Hex-head screws tighten with standard 5/16 in driver
  • cULus listed to UL 486A and RoHS compliant

Specifications

BrandPolaris
TypeMulti-Tap

Questions about this item

What does the 250 kcmil maximum wire size mean when I am making the connection?

It is the largest stranded copper or aluminium conductor the connector will accept; anything larger will not fit the port.

How does the 600 V rating limit what I can use this connector for?

The connector is tested to 600 V, so it must only be installed in circuits that do not exceed that voltage.

What clearance do I need to allow for the 3.85 In. length when mounting the connector?

The body measures 3.85 In. long, so allow at least that much straight space in the enclosure or trough.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.