Pliobond
Pliobond PC-425-LV Contact Cement 25 Series Tan 1 gal Can
A contact cement forming permanent flexible bonds on fabric, fibreglass, glass, leather, metal, rubber and wood, resistant to gasoline, grease, oil and most acids
- TypeSealing Compound
- Permanent flexible bond across fabric, fiberglass, glass, leather, metal, rubber and wood
- Resists gasoline, grease, oil and most acids for durable joints
- Viscosity range 400 to 1 200 cps allows controlled application
- Meets MMM-A-189 Type 2 specification for reliable performance
- Cures by solvent evaporation or thermoset for versatile use
Pliobond PC-425-LV Contact Cement
This Pliobond PC-425-LV contact cement is a sealing compound designed for general-purpose bonding across a wide variety of substrates. It suits professionals and hobbyists who need a permanent flexible bond on materials such as fabric, fiberglass, glass, leather, metal, rubber and wood. The 25 Series formula resists gasoline, grease, oil and most acids. It meets standard MMM-A-189 Type 2.
When the jump is worth it
Switch to this adhesive when your current product cannot handle fuel, oil or chemical exposure, or when you require a flexible joint that stays intact across dissimilar materials. The viscosity range of 400 to 1 200 cps allows controlled application on vertical or overhead surfaces without excessive run-off. It is not for buyers who need a low-odour formula or a product approved for food-contact surfaces.
Installation and common issues
Apply to both surfaces, allow the solvent to evaporate until tacky, then press together for a thermoset functional cure. Because the product carries a California Proposition 65 warning for cancer and reproductive harm, use in a well-ventilated area and wear appropriate protective equipment. Common issues include bonding failure if surfaces are not clean and dry, or if the open time is exceeded before assembly.
Highlights
- Permanent flexible bond across fabric, fiberglass, glass, leather, metal, rubber and wood
- Resists gasoline, grease, oil and most acids for durable joints
- Viscosity range 400 to 1 200 cps allows controlled application
- Meets MMM-A-189 Type 2 specification for reliable performance
- Cures by solvent evaporation or thermoset for versatile use
Specifications
| Type | Sealing Compound |
|---|---|
| Brand | PLIOBOND |
Questions about this item
What size container does the 1 gal can of Pliobond PC-425-LV require for storage?
The adhesive is supplied in a 1 gal metal can that can be resealed after each use. Store the can upright in a cool, dry area away from ignition sources and keep the lid tightly closed to prevent solvent loss.
How do I apply Pliobond PC-425-LV contact cement and what is the common mistake?
Stir the tan adhesive, coat both surfaces evenly, allow the solvent to evaporate until the film is dry to the touch, then join the parts with firm pressure. The frequent error is mating the surfaces before the solvent has fully flashed off, which prevents a permanent flexible bond.
When will the bonded joint need inspection or re-application?
The cured bond resists gasoline, grease, oil and most acids, so it typically lasts the service life of the fabric, fibreglass, glass, leather, metal, rubber or wood assembly. Inspect only if the joint is exposed to prolonged chemical immersion or mechanical flexing beyond normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
