Platinum Tools
Platinum Tools Ezex48 Connectors 100 Jar Cat6a
A jar of 100 pass-through Cat6a connectors with hi-lo stagger for conductor isolation, accepting 1.09–1.22 mm insulation and up to 7.36 mm cable diameter
- Hi-lo stagger isolates conductors for better signal integrity
- One-piece pass-through design removes the need for separate bars or liners
- Accepts insulation diameters from .043" to .048" (1.09 to 1.22 mm)
- Supports cables up to .290" (7.36 mm) outer diameter
- 100 connectors per jar simplifies bulk installation projects
Platinum Tools Ezex48 Connectors
Platinum Tools Ezex48 connectors come in a 100-piece jar for Category 6a termination jobs. The hi-lo stagger isolates each conductor to support higher performance on shielded or unshielded cable runs. A one-piece pass-through design removes the need for separate bars or liners during assembly. Installers who need bulk quantities for patch panels or field ends will find the jar format convenient.
Check cable dimensions before ordering
Verify that each conductor insulation measures between 0.043 and 0.048 inches (1.09 to 1.22 mm) so the contacts seat correctly. Confirm the finished cable outer diameter does not exceed 0.290 inches (7.36 mm) or the connector will not close properly. These connectors are typically used with Cat6a cable; other categories may fall outside the stated ranges. Mismatched dimensions cause insertion loss or intermittent links.
Fits standard Cat6a patch panels and wall plates
The pass-through body lets you verify wire order before crimping, which reduces rework on dense patch panels. No separate liner means fewer loose parts to manage on a ladder or in a rack. The jar keeps 100 connectors organised and protected from dust between jobs. Builds that require tool-less keystones or non-pass-through bodies will need a different connector style.
Highlights
- Hi-lo stagger isolates conductors for better signal integrity
- One-piece pass-through design removes the need for separate bars or liners
- Accepts insulation diameters from .043" to .048" (1.09 to 1.22 mm)
- Supports cables up to .290" (7.36 mm) outer diameter
- 100 connectors per jar simplifies bulk installation projects
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the jar and what else do I need to terminate Cat6a cables?
The jar contains 100 Ezex48 connectors. You will need a compatible crimp tool and Cat6a cable with conductors measuring 0.043" to 0.048" and an outer diameter up to 0.290".
How do I know if the Ezex48 is the right version for my cable?
Choose the Ezex48 when your solid or stranded conductors have an insulation diameter between 1.09 mm and 1.22 mm and the finished cable jacket does not exceed 7.36 mm.
What does the hi-lo stagger design do once the connector is crimped on a real cable?
The hi-lo stagger isolates each conductor inside the pass-through body, reducing crosstalk and helping the terminated link meet Cat6a performance requirements.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115352BTC
In stock
