We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal wall-mount switch with eight RJ45 ports and PoE labels

PLANET

PLANET WGS-804HPT 8-port managed network switch 4-port PoE+

SKU CH-XXAW-NSD6T MPN WGS-804HPT

Wall-mountable managed switch with eight gigabit ports and four PoE+ ports for industrial temperatures

  • FormatWall Mountable
  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 8
  • Network Management TypeManaged
  • Primary Ports8 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table8K
  • Managed Layer 2 switch with full SNMP, VLAN and QoS control
  • Four PoE+ ports deliver up to 15.4 watts each for cameras or access points
  • Eight gigabit RJ45 ports with 8K MAC table and 4.1MB buffer
  • Industrial temperature rating from -40 to 75 degrees Celsius
  • Wall-mountable metal enclosure fits tight cabinet or DIN-rail spaces

Industrial managed switch with PoE+

The PLANET WGS-804HPT is an 8-port Gigabit managed switch designed for wall mounting in harsh environments. Four ports deliver IEEE 802.3af and 802.3at PoE+ power to devices such as IP cameras or wireless access points. It operates across a -40 to 75 degrees C temperature range without active cooling.

Suits installers needing rugged PoE

Network engineers who require VLAN segmentation, QoS prioritisation and redundancy protocols will find the feature set adequate. The switch supports 256 VLAN groups, LACP link aggregation and SNMP monitoring. Buyers who need 10 Gigabit uplinks, Layer 3 routing or fibre ports should look at other models.

Deciding specification: 4-port PoE+ budget

The four PoE+ ports share a total power budget that must cover every connected device; verify the combined draw before deployment. If the installation demands more powered ports or a higher aggregate budget, this unit will not meet the requirement.

Highlights

  • Managed Layer 2 switch with full SNMP, VLAN and QoS control
  • Four PoE+ ports deliver up to 15.4 watts each for cameras or access points
  • Eight gigabit RJ45 ports with 8K MAC table and 4.1MB buffer
  • Industrial temperature rating from -40 to 75 degrees Celsius
  • Wall-mountable metal enclosure fits tight cabinet or DIN-rail spaces

Specifications

BrandPLANET
ModelWGS-804HPT
FormatWall Mountable
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Network Management TypeManaged
Primary Ports8 x RJ45
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
Switching MethodStore and Forward
VLAN Support802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Jumbo Frames10KB
Buffer Memory4.1MB
ProtocolsSpanning Tree Protocol:
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
SecurityIEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast/Unknown unicast/Unknown multicast
PoEPoE Standard: IEEE 802.3af / 802.3at Power over Ethernet PSE
PoE Power Supply Type: End-span
PoE Power Output:
IEEE 802.3af Standard: Per port 48V~ - 56V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard: Per port 50V - 56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment: 1/2 (+), 3/6 (-)
PoE Power Budget: 144 watts (depending on power input)
Max. Number of Class 2 PDs: 4
Max. Number of Class 3 PDs: 4
Max. Number of Class 4 PDs: 4
SNMPYes
QoS8 mapping IDs to 8 level priority queues:
Port Number
802.1p priority
DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
LACPYes
Layer2
Port MirroringTX/RX/Both
Many-to-1 monitor
LEDsPower LED: Power (Green)
PoE Power Usage LED: 30W, 60W, 90W, 120W (Green)
PoE Port(Port-1 to Port-4): PoE-in-Use (Orange), LNK/ACT (Green)
10/100/1000BASE-TX Port (Port-5 to Port-8): 1000 (Green), LNK/ACT (Green)
ButtonReset Button:
< 5 sec: System reboot
> 5 sec: Factory default
Power48 - 56V DC, 3A (max.)
Max. 152 watts / 519 BTU
FeaturesPhysical Port:
8-Port 10/100/1000BASE-T Gigabit RJ45 copper with 4-ort IEEE 802.3at/af PoE Injector (Port-1 to Port-4)
Power over Ethernet:
Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
Backward compatible with IEEE 802.3af Power over Ethernet
Up to 4 ports of IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100 meters
PoE management:
Total PoE power budget control
Per port PoE function enable/disable
PoE
Dimensions5.28" x 5.82" x 0.98"
Weight1.38 lbs.
Temperature-40 - 75 degree Celsius (Operating)
-40 - 85 degree Celsius (Storage)
Humidity5% - 95%, Non-condensing
Shipping weight1.36 kg
Package size229 × 211 × 102 mm

Questions about this item

Does the fanless WGS-804HPT stay cool when mounted in a cabinet that reaches 75 °C?

The switch is rated for -40 to 75 °C operating temperature and uses a fanless design, so it dissipates heat passively even at the top of that range.

What power source must I provide for the four PoE+ ports to deliver 48 V to 56 V DC?

The unit accepts a 48 V to 56 V DC input (depending on the power supply used) and passes that voltage to the PoE+ ports, so you need a compatible DC source.

Will my older 100BASE-FX fibre links work alongside the 1000BASE-T copper ports on this switch?

Yes, the supported standards include IEEE 802.3u 100BASE-FX and IEEE 802.3ab 1000BASE-T, so legacy Fast Ethernet fibre and Gigabit copper can coexist.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.