SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
PLANET
Industrial managed switch with eight PoE+ ports, two SFP uplinks, LCD touch screen, and dual DC power input for -20 to 70 °C operation
This managed Layer 2+ switch delivers eight 10/100/1000T ports with 802.3at PoE+ and two 100/1000X SFP uplinks. It is built for wall-mounted deployment in industrial or commercial environments where powered devices such as IP cameras or wireless access points need both data and power over a single cable. The unit operates from -20 to 70 degrees Celsius. An LCD touch screen provides local status and configuration access.
Verify that your site can supply dual DC inputs within the 48 to 56 volt range; the manufacturer recommends greater than 51 volts for full PoE+ output across all eight ports. Total power draw reaches 251 watts under full PoE load, so the upstream power source and wiring must support that sustained demand. The switch consumes only 7.2 watts with no connected devices. Operating humidity tolerance spans 5 to 95 percent non-condensing.
The compact 5.51 by 7.09 by 0.96 inch enclosure mounts directly to a wall or DIN rail, leaving rack units available for servers or storage. Two SFP slots accept 100 or 1000 megabit transceivers for fiber or copper uplinks to a core switch. An 8K MAC table, 4MB buffer, VLAN, QoS, SNMP and port mirroring provide managed features without a separate appliance. Weight is 1.51 pounds.
| Brand | PLANET |
|---|---|
| Model | WGS-5225-8P2SV |
| Format | Wall Mountable |
| Network Management Type | Managed |
| Primary Ports | 8-Port 10/100/1000T 802.3at PoE 2-Port 100/1000X SFP |
| MAC Address Table | 8K |
| Switching Method | Store and Forward |
| VLAN Support | Yes |
| Jumbo Frames | 9KB |
| Buffer Memory | 4MB |
| PoE | Yes |
| SNMP | Yes |
| QoS | Yes |
| Port Mirroring | Yes |
| Power | Power Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended) Power Consumption: Max. 7.2 watts / 24.7 BTU (Power on without any connection) Max. 251 watts / 861.2 BTU (Full loading with PoE function) |
| Dimensions | 5.51" x 7.09" x 0.96" |
| Weight | 1.51 lbs. |
| Temperature | Operating Temperature: -20 ~ 70 degree Celsius Storage Temperature: -40 ~ 85 degree Celsius |
| Humidity | 5% - 95%, Non-condensing |
| Shipping weight | 1.36 kg |
| Package size | 254 × 178 × 51 mm |
The switch itself is included; you must supply a dual 48-56 V DC power source and SFP transceivers for the two 100/1000X SFP ports.
Use the eight 10/100/1000T ports for PoE+ devices up to 251 W total; use the two SFP ports for fibre uplinks at 100 or 1000 Mbps.
It is the maximum combined PoE+ output when the supply exceeds 51 V DC; actual per-port power depends on the attached device class and cable length.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?