We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal wall-mount switch with eight RJ45 ports and two SFP slots, status LEDs along the front edge

PLANET

PLANET WGS-5225-8P2S 8-Port PoE+ 2 SFP Wall Mount Managed Switch

SKU CH-0T6Y-BQQF9 MPN WGS-5225-8P2S

Wall-mountable managed switch with eight PoE+ Gigabit RJ45 ports and two SFP slots for fibre uplinks

  • FormatWall Mountable
  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX / 100BASE-FX IEEE
  • Network Management TypeManaged
  • Primary Ports8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
  • MAC Address Table8K
  • Switching MethodStore and Forward
  • Managed L2+ switching with VLAN, QoS and SNMP control
  • Eight Gigabit PoE+ ports deliver up to 251 W total power
  • Dual SFP slots support 100/1000X fibre uplinks
  • Wall-mountable metal case fits tight industrial spaces
  • Redundant 48–56 V DC input with ITU-T G.8032 ring protection

Industrial PoE+ wall-mount switch

The PLANET WGS-5225-8P2S is a managed Layer 2+ switch designed for wall mounting in industrial environments. It provides eight Gigabit RJ45 ports with IEEE 802.3at PoE+ injection and two SFP slots for fibre uplinks. The unit operates on dual 48 to 56V DC input, with greater than 51V DC recommended for full PoE+ output. It suits installers deploying IP cameras, wireless access points or VoIP phones where AC power is unavailable.

Dual DC input and SFP flexibility

Dual 48 to 56V DC power inputs deliver redundancy for critical infrastructure. The two 100/1000BASE-X SFP slots accept mini-GBIC modules with auto detection, allowing fibre links at 100Mbps or 1Gbps without fixed transceivers. IEEE 802.3ad LACP trunking, VLAN tagging, QoS, port mirroring, SNMP and ITU-T G.8032 ERPS ring protection are supported for managed network control. LEDs show system power, ring status and per-port link, activity and PoE-in-use states.

251 watt PoE budget decides deployment

Maximum power draw reaches 251 watts with full PoE loading, while idle consumption is 7.2 watts. The total PoE budget therefore determines how many Class 4 devices can be powered simultaneously across the eight ports. Buyers needing more than eight powered endpoints or a higher aggregate PoE budget must select a larger switch. The compact 5.51 by 7.09 by 0.96 inch enclosure fits tight cabinets but offers no rack-mount ears.

Highlights

  • Managed L2+ switching with VLAN, QoS and SNMP control
  • Eight Gigabit PoE+ ports deliver up to 251 W total power
  • Dual SFP slots support 100/1000X fibre uplinks
  • Wall-mountable metal case fits tight industrial spaces
  • Redundant 48–56 V DC input with ITU-T G.8032 ring protection

Specifications

BrandPLANET
ModelWGS-5225-8P2S
FormatWall Mountable
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX / 100BASE-FX
IEEE 802.3z Gigabit SX / LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
ITU-T G.8032 Ethernet Ring Protection Switching
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792
Network Management TypeManaged
Primary Ports8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
MAC Address Table8K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9KB
Buffer Memory4MB
PoEYes
SNMPYes
QoSYes
LACPYes
Port MirroringYes
LEDsSystem:
PWR(Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Orange)
LNK / ACT (Green)
Per SFP Interface:
100 LNK / ACT (Orange)
1000 LNK / ACT (Green)
PowerPower Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended)
Power Consumption:
Max. 7.2 watts / 24.7 BTU (Power on without any connection)
Max. 251 watts / 861.2 BTU (Full loading with PoE function)
FeaturesPhysical Port:
8 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
Power over Ethernet:
Complies with IEEE 802.3at Power over Ethernet Plus / end-span PSE
Up to 8 IEEE 802.3af / 802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
PoE management features
- Total PoE power budget control
- Per port PoE function enable / disable
- PoE admin-mod
Dimensions5.51" x 7.09" x 0.96"
Weight1.51 lbs.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 85 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight1.36 kg
Package size254 × 178 × 51 mm

Questions about this item

Will the dual 48-56V DC power inputs need servicing or replacement over time?

The dual 48-56V DC inputs are fixed terminals; no internal power-supply module is present to service or replace.

What limits the SFP uplink throughput when the switch runs at full 251-watt PoE load?

Each SFP slot is fixed at 100/1000BASE-X, so uplink speed caps at 1 Gbps regardless of PoE load.

How much heat does the unit produce when all eight PoE+ ports are fully loaded?

At full PoE loading the switch draws 251 watts and emits 861.2 BTU per hour.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.