We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black PoE+ injector with two RJ45 ports and AC power socket

PLANET

PLANET POE-164 PoE+ Injector 30W 10/100 Mbps

SKU CH-PHPF-5BBJR MPN POE-164

Delivers up to 30 watts of power and data over a single Ethernet cable to compatible devices

  • TypePoE Injector
  • ColorBlack
  • SpecificationsInterface: "Data" Input Port: 1 x RJ45 STP "PoE (Data + Powe
  • Features2-Port RJ-45 interfaces 1-port High Power over Ethernet Mid-
  • Delivers up to 30 watts to power IP cameras, wireless APs or VoIP phones
  • IEEE 802.3at PoE+ compliant and backward compatible with 802.3af devices
  • Auto-detection protects non-PoE equipment from damage during installation
  • Mid-span injector adds power without replacing existing network switches
  • Provides 53 V DC over a single Cat 5e/6 cable up to 100 metres

Single-Port 30 W PoE+ Injector

The PLANET POE-164 is a mid-span injector that adds IEEE 802.3at Power over Ethernet Plus to an existing 10/100 Mbps link. It delivers up to 30 watts at 53 V over a single Cat.5e/6 cable while passing data through unchanged.

Installers with one PoE device and no local mains

This unit suits anyone powering a single IP camera, wireless access point or VoIP phone where a power socket is absent. It is not for installers who need to feed multiple powered devices from one injector or who require gigabit data rates.

30-watt 802.3at power budget

The injector supplies a maximum of 30 watts per the 802.3at standard, auto-detecting compatible equipment and protecting non-PoE gear. That power ceiling decides whether your endpoint can be supported.

Highlights

  • Delivers up to 30 watts to power IP cameras, wireless APs or VoIP phones
  • IEEE 802.3at PoE+ compliant and backward compatible with 802.3af devices
  • Auto-detection protects non-PoE equipment from damage during installation
  • Mid-span injector adds power without replacing existing network switches
  • Provides 53 V DC over a single Cat 5e/6 cable up to 100 metres

Specifications

BrandPLANET
ModelPOE-164
TypePoE Injector
ColorBlack
SpecificationsInterface:
"Data" Input Port: 1 x RJ45 STP
"PoE (Data + Power) Output Port: 1 x RJ45 STP
AC Input Power Socket: 1
LED Indicator:
System: Power x 1 (Green)
PoE Port: Active, PoE ready-in-use x 1 (Green)
Network Cable:
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
EIA/TIA-568 100-ohm STP (100m)
Data Rate: 10/100 Mbps
Unit Output Voltage: DC 53V, 0.6A
Power Requirements: 100-240V AC, 50/60 Hz, 0.75A
Power Consumption: 30 watts (max.)
Number of Devices that can be powered: 1
PoE Standard: IEEE 802.3at Power over Ethernet
Features2-Port RJ-45 interfaces
1-port High Power over Ethernet Mid-span PSE
IEEE 802.3at Power over Ethernet Plus compliant
Backward compatible with IEEE 802.3af Power over Ethernet
Supports PoE Power up to 30 watts for PoE port
Up to 1 IEEE 802.3at device powered
Provides DC 53V power over RJ45 Ethernet cable to device with Ethernet port
Auto-detection of PoE IEEE 802.3at/af equipment and devices that could be damaged by incorrect installation
Remote power feeding up to 100m
Shipping weight0.35 kg
Package size102 × 102 × 102 mm

Questions about this item

Do I need a Cat.5e or Cat.6 cable to use the POE-164?

Yes, the injector requires Cat.5e or Cat.6 Ethernet cable to deliver both data and up to 30 watts of power over the single RJ45 output port.

Will this injector power an older IEEE 802.3af access point alongside my new PoE+ camera?

Yes, the POE-164 is backward compatible with IEEE 802.3af devices, so it can power legacy PoE equipment while also supporting 802.3at gear up to 30 watts.

Which LED confirms the POE-164 is actively powering my IP camera?

The green PoE Port LED labelled "Active, PoE ready-in-use" lights up when a powered device is detected and receiving power through the output port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.