We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact IP30 metal switch with eight RJ45 ports and redundant DC power terminals

PLANET

PLANET ISW-801T 8-Port 10/100TX Industrial Fast Ethernet Switch -40~75°C

SKU CH-P0X7-39FAX MPN ISW-801T

Eight-port unmanaged Fast Ethernet switch with a 1.6 Gbps backplane, redundant 12–48 V DC power and an IP30 metal case rated for –40 to 75 °C operation

  • FormatWall Mountable
  • StandardsIEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Fu
  • Network Management TypeUnmanaged
  • Primary Ports8 x RJ45
  • Primary Port Speed10/100Mbps
  • MAC Address Table1K
  • Operates from -40 to 75 °C for harsh environments
  • Redundant 12-48V DC input with polarity reverse protection
  • IP30 metal case mounts on DIN rail or wall
  • 8 auto-MDI/MDI-X 10/100 ports simplify cabling
  • 6 Gbps backplane with store-and-forward switching

Industrial 8-Port Fast Ethernet Switch

The PLANET ISW-801T is an unmanaged switch with eight 10/100 Mbps RJ45 ports supporting auto MDI/MDI-X. It operates from -40 to 75 degrees Celsius inside an IP30-rated metal case designed for DIN rail or wall mounting. Redundant 12 to 48V DC power inputs with polarity reverse protection ensure uptime in harsh industrial environments.

Suited for Harsh Environments.

This switch fits factories, traffic cabinets and outdoor enclosures where extreme temperatures, vibration or electrical surges rule out commercial gear. Its 1.6 Gbps backplane and store-and-forward switching handle basic automation and surveillance traffic reliably. Networks requiring gigabit speeds, fiber uplinks, managed features or PoE should look at other models.

Temperature Range Decides Deployment

The operating span of -40 to 75 degrees Celsius is the single specification that determines whether this unit belongs in your cabinet. If the installation site never drops below freezing or exceeds typical indoor limits, a standard office switch delivers more bandwidth per pound. When the environment demands this wide range, the ISW-801T is purpose-built to stay online.

Highlights

  • Operates from -40 to 75 °C for harsh environments
  • Redundant 12-48V DC input with polarity reverse protection
  • IP30 metal case mounts on DIN rail or wall
  • 8 auto-MDI/MDI-X 10/100 ports simplify cabling
  • 6 Gbps backplane with store-and-forward switching

Specifications

BrandPLANET
ModelISW-801T
FormatWall Mountable
StandardsIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
Network Management TypeUnmanaged
Primary Ports8 x RJ45
Primary Port Speed10/100Mbps
MAC Address Table1K
Switching MethodStore and Forward
Buffer MemoryEmbedded 448K bits packet buffer
LEDs3 x LED for System and Power
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
1 x LED for each Copper Port
Green: 10/100 LNK / ACT
PowerPower Requirements: 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation: 2.1 watts / 7.1 BTU
Features8-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX Ethernet standard
Backplane (switching fabric): 1.6 Gbps
Automatic address learning and address aging
IP30-rated metal case
12 to 48V DC, redundant power with polarity reverse protection function
DIN rail and wall mount design
Dimensions1.26" x 5.31" x 3.43"
Weight0.94 lb.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 75 degree Celsius
HumidityOperating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
Shipping weight0.43 kg
Package size136 × 88 × 32 mm

Questions about this item

Does the ISW-801T need a fan or make noise when running 24/7 at 75°C?

It has no fan and consumes 2.1 watts, so it runs silently even at the top of its -40 to 75°C range.

What power source must I already have to run this switch?

You need a 12 to 48V DC supply or 24V AC; the unit accepts redundant inputs with reverse-polarity protection.

Will my older 10BASE-T devices work on the ISW-801T's 8 RJ45 ports?

Yes, each port auto-negotiates 10 or 100Mbps and supports auto MDI/MDI-X for legacy NICs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.