We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal PoE injector with two RJ45 ports and terminal block

PLANET

PLANET IPOE-171-60W 60W PoE injector wireless accessory

SKU CH-2R21-D3SD4 MPN IPOE-171-60W

Single-port PoE injector delivers up to 60 watts over gigabit Ethernet with an industrial temperature range of -40 to 75 °C

  • TypePoE Injector
  • SpecificationsInterface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x
  • Delivers up to 60 watts via IEEE 802.3bt Type 3
  • Operates reliably from -40 to 75 degrees C industrial range
  • Accepts 48 to 56 volts DC through terminal block
  • Supports gigabit speeds over 100 metre twisted-pair runs
  • Includes wall-mount kit and dust cap for quick setup

Industrial PoE Injector 60W

The PLANET IPOE-171-60W is a single-port injector that adds 802.3bt Type 3 power to a Gigabit Ethernet link. It accepts 48 to 56 V DC through a terminal block and delivers up to 60 W to a powered device over twisted-pair cable runs of 100 metres. The unit operates from -40 to 75 °C and mounts on a wall or DIN rail for industrial deployment.

Installers needing one high-power drop

This injector suits technicians who must feed a single 802.3bt device such as a PTZ camera or wireless AP where no AC outlet exists. It is not for installers who require multiple powered ports, managed PoE scheduling, or AC mains input without an external supply.

One 60 W port with 75 W input headroom

The injector comfortably powers one Type 3 device drawing the full 60 W while drawing up to 75 W from the DC source. It runs out of capacity when a second powered device is needed or when the connected device exceeds the 60 W Type 3 limit.

Highlights

  • Delivers up to 60 watts via IEEE 802.3bt Type 3
  • Operates reliably from -40 to 75 degrees C industrial range
  • Accepts 48 to 56 volts DC through terminal block
  • Supports gigabit speeds over 100 metre twisted-pair runs
  • Includes wall-mount kit and dust cap for quick setup

Specifications

BrandPLANET
ModelIPOE-171-60W
TypePoE Injector
SpecificationsInterface:
Input Port:
1 x RJ45 STP
Data In
Output Port:
1 x RJ45 STP
PoE (Data + Power) Out
Input power terminal block: 1
Network Cable:
Twisted-pair cable up to 100 meters (328 ft.)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
Data Rate: 10/100/1000 Mbps
Dimensions: 1.26" x 5.31" x 3.46"
Weight: 0.95 lb.
Power Requirements: DC 48~56V, 2A max.
Unit Output Voltage: DC 45~53V
Power Consumption: 75 watts max.
Standards Compliance:
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T
Shipping weight0.91 kg
Package size203 × 152 × 76 mm

Questions about this item

What DC power source must I already have to run the IPOE-171-60W injector?

You need a DC supply delivering 48 to 56 volts at up to 2 amps, connected to the injector's terminal block.

Will my existing 100 Mbps cameras still negotiate correctly through the gigabit RJ45 ports?

Yes, the ports support 10, 100 and 1000 Mbps rates, so 100BASE-TX devices link at their native speed.

How can I confirm the injector is delivering 60 watts to a powered device after installation?

Check that the powered device reports receiving 45 to 53 volts DC and that total draw does not exceed 60 watts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.