We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial metal PoE injector with dual RJ-45 ports and terminal block power input

PLANET

PLANET IPOE-162 30 W PoE injector wireless accessory

SKU CH-NV4G-29J2D MPN IPOE-162

Delivers up to 30 watts of PoE power over Gigabit Ethernet with redundant 24 to 48 V DC input and industrial temperature rating

  • TypePoE Injector
  • SpecificationsInterface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power
  • FeaturesInterface: 2-port RJ-45 interfaces 1-port Data + Power outpu
  • Delivers up to 30 W per port for power-hungry devices
  • Operates reliably from -40 °C to 75 °C in harsh environments
  • Redundant 24–48 V DC or 24 V AC input via terminal block
  • Gigabit mid-span design adds PoE without replacing existing switches
  • IP30 metal housing protects internal components in industrial settings

Industrial 30 W PoE injector

The PLANET IPOE-162 is a single-port, mid-span IEEE 802.3at High Power over Ethernet injector delivering up to 30 watts per PoE port. It combines data and 56 V DC power over Cat.5/5e/6 cables for simplified deployment. The unit accepts redundant 24 to 48 V DC or 24 V AC input via a terminal block. An IP30-rated metal enclosure operates from -40 to 75 °C for harsh environments.

Redundant power terminal block

A master and slave terminal block allows two independent power sources to feed the injector simultaneously. If one supply fails, the other maintains PoE output without interruption. This redundancy is critical for surveillance cameras, VoIP phones and wireless access points that must stay online. LED indicators show Power 1, Power 2, Fault and PoE in Use status at a glance.

30 W per port power budget

The injector complies with IEEE 802.3at and supplies a maximum of 30 watts from its single PoE output port. Devices requiring more than 30 watts, such as multi-radio access points or heater-equipped PTZ domes, cannot be powered by this model. Verify the powered device's maximum draw before specifying this injector.

Highlights

  • Delivers up to 30 W per port for power-hungry devices
  • Operates reliably from -40 °C to 75 °C in harsh environments
  • Redundant 24–48 V DC or 24 V AC input via terminal block
  • Gigabit mid-span design adds PoE without replacing existing switches
  • IP30 metal housing protects internal components in industrial settings

Specifications

BrandPLANET
ModelIPOE-162
TypePoE Injector
SpecificationsInterface:
"Data" Input Port: 1 x RJ-45 STP
"PoE (Data+Power)" Output Port: 1 x RJ-45 STP
Input power terminal block: 1
LED Indicator:
System: Power 1, Power 2, Fault (Green)
PoE Port: PoE in Use x 1 (Green)
Network Cable:
10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.)
100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.)
1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate: 10/100/1000Mbps
Dimension: 1.26" x 5.31" x 3.46"
Weight: 1.05 lbs.
Unit Input Voltage: 24 - 48V DC; 24V AC
Power Consumption: 30 watts max.
Number of device can be powered:
FeaturesInterface:
2-port RJ-45 interfaces
1-port Data + Power output
1-port Data input
1 terminal block for master and slave power input. (Power Range: 24 ~ 48V DC / 24V AC redundant power)
PoE:
Gigabit High Power over Ethernet Mid-Span PSE
IEEE 802.3at / 802.3af PoE compliant
IEEE 802.3at / 802.3af splitter devices compatible
Supports PoE Power up to 30 watts for each PoE port
Provides DC 56V power over RJ-45 Ethernet cable to device with Ethernet port
Auto-detects of IEEE 802.3at equipment and protects devices from being damaged by incorrect installation
Remote power feeding up to 100m
Ha
Shipping weight1.36 kg
Package size508 × 381 × 127 mm

Questions about this item

How often should I check the terminal-block connections on the IPOE-162?

Inspect the master and slave terminal-block connections during routine site maintenance to ensure the 24 to 48 V DC or 24 V AC supply remains secure.

What limits continuous 30 W PoE output on the IPOE-162?

The 30 W ceiling of the IEEE 802.3at standard and the injector's single PoE port cap the sustained power delivered to a connected device.

How hot does the IPOE-162 run when it powers a 30 W device all day?

The unit is rated for -40 to 75 °C ambient operation with a fanless IP30 metal housing, so surface temperature will track the surrounding environment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.