We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact industrial managed PoE switch with six RJ45 ports, wall-mount and DIN rail kit, matte metal enclosure

PLANET

PLANET IGS-5226-4P2T 6-port managed PoE network switch

SKU CH-PCTF-NZPWX MPN IGS-5226-4P2T

Industrial managed 6-port Gigabit switch with four PoE+ ports, Layer 3 routing, 255 VLANs and EN50155 rail certification for -40 to 75 °C operation

  • FormatWall-mount and DIN Rail Kit
  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Giga
  • Network Management TypeManaged
  • Primary Ports6 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table8K
  • Industrial-grade reliability with EN50155 certification for rolling stock
  • Four PoE+ ports deliver up to 15.4 watts per device
  • Wide temperature operation from -40 to 75 degrees C
  • Layer 3 static routing for IPv4 and IPv6 networks
  • Flexible mounting with wall-mount and DIN rail kit included

Industrial Managed PoE Switch

The PLANET IGS-5226-4P2T is a Layer 3 managed Ethernet switch built for industrial environments. It provides six RJ45 ports operating at 10/100/1000Mbps and supports wall-mount or DIN rail installation. The unit operates across a -40 to 75 degrees C temperature range and complies with EN50155 for railway applications. It is suited for deployments requiring rugged, managed connectivity with PoE capability.

PoE Budget and Port Constraints

Four ports deliver IEEE 802.3af/at PoE with end-span power output up to 15.4 watts per port on the 802.3af standard and higher on 802.3at. Total available PoE power depends on the external power supply voltage, which ranges from 48V to 53V DC. The two non-PoE ports provide data only. Jumbo frames up to 9000 bytes are supported, and the switch uses store-and-forward switching with a 4MB buffer.

Upgrade From Unmanaged Or Non-PoE Switches

This switch replaces unmanaged or non-PoE industrial switches where VLAN segmentation, static routing, or powered device support are now required. It adds IEEE 802.1Q VLANs with up to 255 groups, Q-in-Q tunneling, IPv4/IPv6 static routing, and 802.1X authentication. The jump is warranted when network segmentation, remote management via SNMP, or powering cameras and access points over Ethernet become necessary.

Highlights

  • Industrial-grade reliability with EN50155 certification for rolling stock
  • Four PoE+ ports deliver up to 15.4 watts per device
  • Wide temperature operation from -40 to 75 degrees C
  • Layer 3 static routing for IPv4 and IPv6 networks
  • Flexible mounting with wall-mount and DIN rail kit included

Specifications

BrandPLANET
ModelIGS-5226-4P2T
FormatWall-mount and DIN Rail Kit
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az EEE (Energy Efficient Ethernet)
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 223
Network Management TypeManaged
Primary Ports6 x RJ45
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
Switching MethodStore and Forward
VLAN Support802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Jumbo Frames9000 bytes
Buffer Memory4MB
ProtocolsRouting Protocols:
IPv4 software static routing
IPv6 software static routing
Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
SecurityAuthentication
IEEE 802.1x port-based/MAC-based network access authentication
IEEE 802.1x authentication with guest VLAN
Built-in RADIUS client to cooperate with the RADIUS servers
RADIUS/TACACS+ users access authentication
Access Control List
IP-based Access Control List (ACL)
MAC-based Access Control List (ACL)
Source MAC/IP address binding
DHCP Snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized intrude
PoEPoE Standard: IEEE 802.3af/802.3at PoE/PSE
PoE Power Supply Type: End-span
PoE Power Output
IEEE 802.3af Standard: Per port 48V - 53V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard: Per port 53V - 56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment: 1/2 (+), 3/6 (-)
PoE Power Budget: 144 watts max. (depending on power input)
PoE Ability:
PD at 7 watts: 4 units
PD at 15.4 watts: 4 units
PD at 30.8 watts: 4 units
SNMPYes
QoSTraffic classification based, strict priority and WRR
8-level priority for switching:
Port number
802.1p priority
802.1Q VLAN tag
DSCP / ToS field in IP packet
LACPYes
Layer3
Port MirroringMany-to-1 monitor
LEDsSystem:
PWR1 (Green), PWR2 (Green), Fault (Red)
Ring (Green), R.O. (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 2):
LNK/ACT (Green)
10/100/1000T RJ45 Interfaces (Port 3 to Port 6):
LNK/ACT (Green)
PoE-in-Use (Orange)
ButtonReset Button:
< 5 sec: System reboot
> 5 sec: Factory default
PowerDual 48 - 56V DC (>53V DC for PoE+ output recommended)
Max. 165.3 watts / 563.67 BTU
FeaturesPhysical Port:
6-port 10/100/1000BASE-T dustproof RJ45 copper with 4-port IEEE 802.3at/af Power over Ethernet Injector function
Hardware Conformance:
Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
Complies with IEEE 802.3af Power over Ethernet end-span PSE
Up to 4 ports of IEEE 802.3af/802.3at devices powered
Supports PoE Power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100 meters
PoE Management:
Total PoE power budget control
Per port PoE function enable/d
Dimensions6.30" x 5.20" x 2.95"
Weight1.79 lbs.
TemperatureOperating: -40 - 75 degree Celsius
Storage: -40 - 80 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight1.59 kg
Package size236 × 208 × 127 mm

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.