We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal industrial switch with five RJ45 ports and wall-mount brackets

PLANET

PLANET IGS-501T 5-Port Industrial Gigabit Network Switch

SKU CH-RKK2-BXM84 MPN IGS-501T

Five-port unmanaged Gigabit switch with redundant 12-48V DC power and -40 to 75 °C operating range

  • FormatWall Mountable
  • StandardsIEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab G
  • Network Management TypeUnmanaged
  • Primary Ports5 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table2K
  • Operates reliably from -40 to 75 degrees Celsius
  • Redundant 12 to 48V DC power with polarity reverse protection
  • Five gigabit RJ45 ports with auto MDI/MDI-X for simple cabling
  • IP30 metal case and DIN rail or wall mount for harsh sites
  • 10 Gbps switching fabric and 9KB jumbo frames handle heavy traffic

Industrial Gigabit Switch

The PLANET IGS-501T is an unmanaged 5-port Gigabit Ethernet switch built for harsh environments. It operates reliably from -40 to 75 degrees Celsius inside an IP30-rated metal enclosure. Five RJ45 ports support 10/100/1000Mbps speeds with auto MDI/MDI-X detection. The unit is designed for DIN rail or wall mounting in industrial cabinets.

Redundant DC Power Input

Dual 12 to 48V DC inputs provide redundant supply with polarity reverse protection. The removable terminal block accepts master and slave feeds, while 24V AC is also supported. Power LEDs show status for each input and a fault indicator. Maximum draw is 8.3 watts at 24V DC and 4.8 watts at 48V DC. No external power adapter is included.

For Deterministic Wired Networks

This switch suits factory automation, outdoor surveillance and transportation systems that need fanless, wide-temperature operation. It stores up to 2K MAC addresses and forwards 9KB jumbo frames. Buyers needing managed features such as VLANs, QoS or SNMP monitoring should look elsewhere. PoE-powered devices require a separate injector or PoE switch.

Highlights

  • Operates reliably from -40 to 75 degrees Celsius
  • Redundant 12 to 48V DC power with polarity reverse protection
  • Five gigabit RJ45 ports with auto MDI/MDI-X for simple cabling
  • IP30 metal case and DIN rail or wall mount for harsh sites
  • 10 Gbps switching fabric and 9KB jumbo frames handle heavy traffic

Specifications

BrandPLANET
ModelIGS-501T
FormatWall Mountable
StandardsIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x full-duplex flow control
Network Management TypeUnmanaged
Primary Ports5 x RJ45
Primary Port Speed10/100/1000Mbps
MAC Address Table2K
Switching MethodStore and Forward
Jumbo Frames9KB
Buffer Memory1M bits on-chip buffer memory
LEDs3 x LED for system and power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for each copper port
Green: 1000 Mbps LNK / ACT
Orange:10/100 Mbps LNK / ACT
PowerPower Requirements: 12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation:
4.8 watts / 16 BTU (48V DC)
8.3 watts / 28 BTU (24V DC)
Features5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet
standard
Supports auto-negotiation and 10/100 Mbps half / full duplex and 1000 Mbps full duplex mode
Backplane (switching fabric): 10 Gbps
1M bits on-chip buffer memory
IP30 metal case protection
DIN rail and wall mount design
Dimensions1.26" x 5.31" x 3.43"
Weight0.88 lb.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 75 degree Celsius
HumidityOperating Humidity: 5% ~ 90%
Storage Humidity: 5% ~ 90% non-condensing
Shipping weight0.50 kg
Package size136 × 88 × 32 mm

Questions about this item

How many MAC addresses can the IGS-501T store before the table fills up under sustained traffic?

The switch holds a 2K MAC address table, which is the practical limit for address learning during continuous operation.

What power draw and heat output should I expect when the switch runs 24/7 on a 48 V DC supply?

At 48 V DC the unit draws 4.8 watts and dissipates 16 BTU per hour, with no fan so acoustic noise is effectively zero.

Which power sources and cabling must already be in place for the IGS-501T to operate?

You need a 12–48 V DC source (or 24 V AC) wired to the removable terminal block, plus standard Cat5e or better RJ45 patch cables for the five copper ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.