We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal box with five RJ45 ports and DIN rail clip

PLANET

PLANET IGS-500T 5-Port Gigabit DIN Rail network switch

SKU CH-1TME-MGRM2 MPN IGS-500T

DIN-rail industrial switch with five gigabit RJ45 ports, VLAN and jumbo-frame support, redundant 12-48V DC power and -40 to 75 °C operation

  • FormatDIN Rail Mount
  • StandardsIEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab G
  • Network Management TypeUnmanaged
  • Primary Ports5 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table4K
  • Gigabit speeds on five RJ45 ports for fast wired connectivity
  • DIN rail mount fits standard industrial cabinets saving panel space
  • Wide 12 to 48 volt DC input with redundant feeds and polarity protection keeps the switch running
  • Operates from minus 40 to plus 75 degrees Celsius for harsh environments
  • Unmanaged plug-and-play operation with 9KB jumbo frames reduces setup time

Industrial DIN Rail Switch

The PLANET IGS-500T is an unmanaged Gigabit Ethernet switch built for DIN rail mounting in industrial cabinets. It provides five RJ45 ports that auto-negotiate at 10, 100 or 1000 Mbps and supports IEEE 802.3az Energy Efficient Ethernet. A 4K MAC address table and 1 MB buffer memory handle store-and-forward switching with 9 KB jumbo frames.

Suits harsh cabinets, not managed cores

This unit fits installers who need a compact, fanless switch that operates from -40 to 75 degrees Celsius with redundant 12 to 48 V DC or 24 V AC input and polarity reverse protection. It is not for networks that require Layer 2 management, port mirroring, link aggregation or Power over Ethernet. Buyers who need remote configuration or traffic prioritisation beyond IEEE 802.1p Class of Service should look at managed alternatives.

Drops into a rail, frees a socket

The 1.18 by 2.76 by 4.09 inch metal case clips onto standard DIN rail and draws only 3.6 watts, leaving more headroom on the DC bus for other devices. Redundant dual power terminals keep the link up if one feed fails, while the wide temperature and humidity ratings remove the need for a climate-controlled enclosure. VLAN pass-through and jumbo frame support let the switch carry segmented industrial traffic without extra configuration.

Highlights

  • Gigabit speeds on five RJ45 ports for fast wired connectivity
  • DIN rail mount fits standard industrial cabinets saving panel space
  • Wide 12 to 48 volt DC input with redundant feeds and polarity protection keeps the switch running
  • Operates from minus 40 to plus 75 degrees Celsius for harsh environments
  • Unmanaged plug-and-play operation with 9KB jumbo frames reduces setup time

Specifications

BrandPLANET
ModelIGS-500T
FormatDIN Rail Mount
StandardsIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
Network Management TypeUnmanaged
Primary Ports5 x RJ45
Primary Port Speed10/100/1000Mbps
MAC Address Table4K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9KB
Buffer Memory1MB
PowerPower Requirements: 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation: 3.6 watts / 12.35 BTU
Dimensions1.18" x 2.76" x 4.09"
Weight0.56 lb.
TemperatureOperating Temperature: -40 ~ 75 degree Celsius
Storage Temperature: -40 ~ 75 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight0.91 kg
Package size178 × 127 × 76 mm

Questions about this item

What DC voltage range must my power supply deliver for the IGS-500T to operate?

The switch requires a 12~48V DC source with redundant input and polarity reverse protection.

Will my 10 Mbps legacy devices negotiate correctly on the 5 RJ45 ports?

Each port supports 10/100/1000Mbps auto-negotiation under IEEE 802.3, 802.3u and 802.3ab.

How can I verify the switch is forwarding traffic after installation?

Check the per-port link and activity LEDs; they illuminate when a valid 10, 100 or 1000 Mbps connection is established and blink during data transfer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.