We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial metal switch with 18 RJ45 ports and 2 SFP slots on DIN rail mount

PLANET

PLANET IGS-20160HPT 16-port PoE+ 2-port SFP managed network switch

SKU CH-0WVX-1KCQC MPN IGS-20160HPT

Managed 16-port Gigabit PoE+ switch with two SFP uplinks, Layer 3 routing and industrial temperature rating

  • FormatDIN Rail and Wall Mount Design
  • StandardsIEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 8
  • Network Management TypeManaged
  • Primary Ports18 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table8K
  • Managed Layer 3 switching with static IPv4 and IPv6 routing
  • 16 PoE+ ports deliver up to 15.4 watts per port for powered devices
  • 18 RJ45 ports plus 2 SFP slots for flexible copper or fibre uplinks
  • Industrial design operates from -40 to 75 degrees C on DIN rail or wall mount
  • 8K MAC table and 4MB buffer with 9000-byte jumbo frame support

Industrial 16-port PoE+ managed switch

The PLANET IGS-20160HPT is a managed Layer 3 switch built for harsh environments. It provides sixteen 10/100/1000BASE-T PoE+ ports, two additional Gigabit RJ45 ports and two 100/1000X SFP uplinks. The unit mounts on DIN rail or wall and operates from -40 to 75 °C without fans.

PoE+ deployments needing rugged mounting

This switch suits installers powering IP cameras, wireless APs or VoIP phones in factories, transport cabinets or outdoor enclosures where extended temperature range and DIN-rail mounting are required. It is not for buyers who need a rack-mount form factor, 10 Gigabit uplinks, or a larger PoE budget than the IEEE 802.3at per-port limit.

15.4 W per-port PoE ceiling

Each of the sixteen PoE+ ports delivers up to 15.4 W under the IEEE 802.3af baseline, with the higher 802.3at standard supported where the power supply allows. This single figure determines how many powered devices can run simultaneously without exceeding the switch’s total power capacity.

Highlights

  • Managed Layer 3 switching with static IPv4 and IPv6 routing
  • 16 PoE+ ports deliver up to 15.4 watts per port for powered devices
  • 18 RJ45 ports plus 2 SFP slots for flexible copper or fibre uplinks
  • Industrial design operates from -40 to 75 degrees C on DIN rail or wall mount
  • 8K MAC table and 4MB buffer with 9000-byte jumbo frame support

Specifications

BrandPLANET
ModelIGS-20160HPT
FormatDIN Rail and Wall Mount Design
StandardsIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
Network Management TypeManaged
Primary Ports18 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
Switching MethodStore and Forward
VLAN Support802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Jumbo Frames9000 bytes
Buffer Memory4MB
ProtocolsRouting Protocols:
IPv4 software static routing
IPv6 software static routing
SecurityIEEE 802.1x Port-based/MAC-based network access authentication
Built-in RADIUS client to cooperate with the RADIUS servers
TACACS+ login users access authentication
RADIUS/TACACS+ users access authentication
IP-based Access Control List (ACL)
MAC-based Access Control List
Source MAC/IP address binding
DHCP snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized intruder
PoEPoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type: End-span
PoE Power Output:
IEEE 802.3af Standard
Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
Per port 51V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment: 1/2 (+), 3/6 (-)
PoE Power Budget:
48V Power input
240W maximum (depending on power input)
56V Power input
Single power input: 260W maximum (depending on power input)
Dual power input: 320W maximum (depending on power input)
Max. number of Class 2 PDs: 16
Max. number of Class 3 PDs
SNMPYes
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
Port number
802.1p priority
802.1Q VLAN tag
DSCP/TOS field in IP packet
LACPYes
Layer3
Port Mirroring1 to 1 monitor
LEDsSystem:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Orange)
LNK/ACT (Green)
Per 10/100/1000T RJ45Ports:
1000 LNK/ACT (Orange)
100 LNK/ACT (Green)
Per SFP Interface:
1000 LNK/ACT (Orange)
100 LNK/ACT (Green)
ButtonReset Button:
< 5 sec: System reboot
> 5 sec: Factory default
PowerDual 48 - 56V DC (>51V DC for PoE+ output recommended)
11.1 watts / 37.87BTU (Power on without any connection)
349 watts / 119.08BTU (Full loading with PoE function)
FeaturesPhysical Port:
16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
1 RJ45 console interface for basic management and setup
Industrial Case & Installation:
IP30 aluminum case protection
Supports 6000V DC Ethernet ESD protection
Digital Input & Digital Output:
2 Digital Input (DI)
2 Digital Output (DO)
Integrate sensors into auto alarm system
Transfer alarm to IP network via email and SNMP trap
Layer 2 Features:
Prevents packet loss with back pre
Dimensions3.31" x 5.98" x 4.21"
Weight3.39 lbs.
Temperature-40 - 75 degree Celsius (Operating)
-40 - 85 degree Celsius (Storage)
Humidity5% - 95%, Non-condensing
Shipping weight1.13 kg
Package size212 × 164 × 132 mm

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.