We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal DIN-rail switch with 16 RJ45 ports and 4 SFP slots

PLANET

PLANET IGS-20040MT network switch 16 RJ45 4 SFP managed -40 to 75 C

SKU CH-JF21-J9BAS MPN IGS-20040MT

Managed industrial switch with 16 copper ports, 4 SFP slots, VLAN, QoS and -40 to 75 °C operation

  • FormatDIN Rail Mount
  • Network Management TypeManaged
  • Primary Ports16 x RJ45 + 4 x SFP
  • Primary Port Speed10/100Mbps + 1000Mbps
  • VLAN SupportYes
  • SNMPYes
  • 16 copper ports plus 4 SFP slots for flexible uplinks
  • Layer 2 management with VLAN, QoS and Spanning Tree Protocol
  • Industrial temperature range from -40 to 75 degrees C
  • Redundant 12 to 48V DC power with 6000V EFT protection
  • DIN rail or wall mount metal case rated IP30

Industrial L2+ managed switch

The PLANET IGS-20040MT is a Layer 2+ managed switch built for harsh industrial environments. It provides 16 RJ45 ports at 10/100/1000 Mbps and four SFP slots for 100/1000Base-X fibre uplinks. An IP30 aluminium case and DIN-rail or wall mounting suit factory floors, transport cabinets and outdoor enclosures. Operating range spans -40 to 75 degrees C.

Upgrade from unmanaged or commercial gear

This switch replaces unmanaged units when VLAN segmentation, QoS prioritisation or Spanning Tree redundancy become necessary. The jump is worth it when deterministic traffic handling, storm control or SNMP monitoring are required for automation networks. It also supersedes commercial switches that cannot survive wide temperature swings or vibration. Redundant 12 to 48V DC inputs with polarity protection keep the link alive during power fluctuations.

Build integration: power, alarms and fibre

Dual DC inputs accept 12 to 48V and an AC 24V adapter, removing the need for a separate industrial PSU. Two digital inputs and two digital outputs connect sensors or actuators directly to the switch alarm system, which forwards traps by email or SNMP. SFP slots free copper ports for end devices while extending reach over fibre. Console port gives local CLI access for initial setup.

Highlights

  • 16 copper ports plus 4 SFP slots for flexible uplinks
  • Layer 2 management with VLAN, QoS and Spanning Tree Protocol
  • Industrial temperature range from -40 to 75 degrees C
  • Redundant 12 to 48V DC power with 6000V EFT protection
  • DIN rail or wall mount metal case rated IP30

Specifications

FormatDIN Rail Mount
Network Management TypeManaged
Primary Ports16 x RJ45 + 4 x SFP
Primary Port Speed10/100Mbps + 1000Mbps
VLAN SupportYes
SNMPYes
QoSYes
Layer2
CaseMetal Case
Shipping weight2.27 kg
Package size356 × 203 × 102 mm

Questions about this item

What mounting options does the DIN-rail case provide?

The IP30 aluminium case supports both DIN-rail and wall-mount installation for industrial cabinets.

How is the redundant DC power connected, and what mistake should be avoided?

Connect two 12 to 48 V DC sources to the redundant terminals; the built-in polarity reverse protection prevents damage if wires are swapped.

When should the SFP transceivers be replaced or upgraded?

Replace or upgrade the mini-GBIC modules when migrating links between 100 Mbps and 1000 Mbps fibre speeds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.