We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact industrial switch with eight RJ45 ports two SFP slots IP30 metal case DIN rail mount

PLANET

PLANET IGS-1020TF 8-port 10/100/1000 + 2 SFP network switch

SKU CH-7DTE-V5X5X MPN IGS-1020TF

Industrial unmanaged switch with eight gigabit RJ45 ports and two SFP slots, operating from -40 to 75 degrees Celsius

  • FormatDIN Rail and Wall Mount Design
  • StandardsIEEE 802.3 Ethernet/10BASE-T IEEE 802.3u Fast Ethernet/100BA
  • Network Management TypeUnmanaged
  • Primary Ports8 x RJ45 + 2 x SFP
  • Primary Port Speed10/100/1000Mbps
  • MAC Address Table4K
  • Operates reliably from -40 to 75 degree Celsius industrial range
  • Redundant DC 12-48V or AC 24V input with polarity reverse protection
  • IP30 metal case protects against dust in harsh environments
  • 8 RJ45 ports plus 2 SFP slots for flexible fibre uplinks
  • 9216-byte jumbo frames boost throughput for large data transfers

Industrial Ethernet switch for harsh environments

The PLANET IGS-1020TF is an unmanaged industrial switch built for reliable networking in extreme conditions. It provides eight copper ports and two SFP slots for fibre uplinks in a compact metal enclosure. The unit operates across a -40 to 75 degree Celsius range with IP30 protection. It suits factory automation, transportation and outdoor surveillance deployments.

DIN rail mounting and redundant DC power

A rugged IP30 metal case protects internal circuitry while supporting both DIN rail and wall mounting. Dual DC power inputs accept 12 to 48 volts with polarity reverse protection for continuous operation. LED indicators show power status, port link speed and activity for quick diagnostics. The fanless design ensures silent, maintenance-free performance in dusty or vibration-prone settings.

Upgrade from basic commercial switches

This model replaces standard office switches that lack wide-temperature ratings, surge protection or industrial mounting options. The jump is worth it when equipment faces temperature swings, electrical noise or vibration that would kill consumer hardware. It is not for buyers who need managed features such as VLANs, QoS or remote monitoring.

Highlights

  • Operates reliably from -40 to 75 degree Celsius industrial range
  • Redundant DC 12-48V or AC 24V input with polarity reverse protection
  • IP30 metal case protects against dust in harsh environments
  • 8 RJ45 ports plus 2 SFP slots for flexible fibre uplinks
  • 9216-byte jumbo frames boost throughput for large data transfers

Specifications

BrandPLANET
ModelIGS-1020TF
FormatDIN Rail and Wall Mount Design
StandardsIEEE 802.3 Ethernet/10BASE-T
IEEE 802.3u Fast Ethernet/100BASE-TX
IEEE 802.3ab Gigabit Ethernet/1000BASE-T
IEEE 802.3z Gigabit Ethernet/1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.1p Cos
Network Management TypeUnmanaged
Primary Ports8 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table4K
Switching MethodStore and Forward
Jumbo Frames9216 bytes
LEDs3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Power Fault
2 x LED for Per Copper Port (Port-1~Port-8):
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
2 x LED for Per Mini-GBIC Interface (Port-9 and Port-10):
Green: 1000 LNK/ACT
Orange:100 LNK/ACT
PowerDC 12 - 48V or AC 24V
Redundant power with polarity reverses protection function
8.7 watts / 29.69BTU
FeaturesPhysical Port:
8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X function
2 SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver type auto-detection
Industrial Case and Installation
IP30 metal case protection
DIN rail and wall mount design
Redundant Power Design:
12 to 48V DC, redundant power with polarity reverse protect function
AC 24V power adapter acceptable
Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Dimensions5.31" x 2.20" x 3.43"
Weight1.19 lbs.
Temperature-40 - 75 degree Celsius
Humidity5% - 95%, Non-condensing
Shipping weight0.54 kg
Package size136 × 88 × 56 mm

Questions about this item

What maximum frame size do the IEEE 802.3 standards on this switch allow?

The switch supports jumbo frames up to 9216 bytes under its supported IEEE 802.3 standards.

What mounting hardware is required for the DIN rail and wall-mount design?

The IP30 metal case includes built-in brackets for standard DIN rail clips and wall-mount screws.

How do you connect the redundant DC inputs without triggering the power-fault LED?

Wire both 12-48 V DC sources to the dual terminal block; polarity-reverse protection prevents faults if leads are swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.