We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with 28 RJ45 ports and 4 SFP slots, 1U height

PLANET

PLANET GS-4210-24P4C 28-port managed PoE+ network switch

SKU CH-SWT6-XCJRH

A 28-port managed Gigabit switch with 24 PoE+ ports delivering up to 30 watts each and a 220-watt total budget, plus four SFP uplink slots

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Port Speed28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port 4 x 100/1000
  • MAC Address Table8K entries
  • VLAN SupportYes
  • Jumbo Frames10K bytes
  • 24 PoE+ ports power cameras and access points directly
  • 28 Gigabit RJ45 ports plus 4 SFP slots for fibre uplinks
  • IPv4 and IPv6 dual-stack management future-proofs network operations
  • 220 W total PoE budget supports high-density deployments
  • 1U rackmount design fits standard cabinets with 440 mm depth

28-port Managed PoE+ Switch

The PLANET GS-4210-24P4C is a rackmount Layer 2 switch with twenty-eight Gigabit RJ45 ports and four SFP slots. Twenty-four RJ45 ports supply up to thirty watts each under the 802.3at PoE+ standard, backed by a 220-watt total budget. Dual IPv4 and IPv6 management, SNMP, QoS, VLAN and port mirroring are included.

Network teams needing PoE+ density and fiber uplinks

This switch suits administrators who need to power two dozen access points, cameras or VoIP phones while uplinking over copper or fiber SFP modules. It does not suit buyers who need Layer 3 routing, modular expansion bays or a higher PoE budget for more than twenty-four powered devices.

220-watt PoE+ budget across 24 ports

The 220-watt power budget is the single figure that decides whether every connected device receives sufficient power. If the combined draw of your powered endpoints exceeds this limit, some ports will be denied power regardless of the thirty-watt per-port ceiling.

Highlights

  • 24 PoE+ ports power cameras and access points directly
  • 28 Gigabit RJ45 ports plus 4 SFP slots for fibre uplinks
  • IPv4 and IPv6 dual-stack management future-proofs network operations
  • 220 W total PoE budget supports high-density deployments
  • 1U rackmount design fits standard cabinets with 440 mm depth

Specifications

FormatRackmount
Network Management TypeManaged
Primary Port Speed28 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X port 4 x 100/1000BASE-X SFP
MAC Address Table8K entries
VLAN SupportYes
Jumbo Frames10K bytes
Buffer Memory4.1 megabits
PoE24 ports with 802.3at / af PoE injector function with port-1 to port-24
SNMPYes
QoSYes
Layer2
Port MirroringYes
Module SupportNo
Power100~240V AC, 50/60Hz, auto-sensing
Dimensions440 x 300 x 44.5 mm, 1U height

Questions about this item

What rack dimensions does the GS-4210-24P4C require for mounting?

The switch measures 440 x 300 x 44.5 mm and is 1U high, so it fits a standard rack with those clearances.

What is the most common mistake when installing the PoE+ ports on this switch?

Connecting powered devices before confirming the total draw stays within the 220 W budget, which can cause ports to shut down.

Which component will need attention first as the switch ages?

The internal AC power supply (100-240 V, 50/60 Hz) is the primary wear item; plan for eventual replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.