We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White electric drum pump with 18 ft hose and 72 in cord, 120 V AC motor, automatic nozzle, self-priming design

Piusi

Piusi F00201A5J Electric Drum Pump 120VAC 9 Max Flow Rate 43/64

SKU CH-KZC8-KGQ7K

Electric drum pump delivers up to 43 units per minute at 22 psi for 50/50 antifreeze and diesel exhaust fluid, includes 18 ft discharge hose and 72 in cord

  • Self-priming design starts quickly without manual effort
  • 18 ft discharge hose reaches distant fill points
  • 120 V AC corded power suits standard workshop outlets
  • 22 psi maximum pressure handles diesel exhaust fluid and antifreeze
  • Automatic nozzle stops flow when container is full

Piusi F00201A5J Electric Drum Pump

The Piusi F00201A5J is a corded electric drum pump rated for 120 V AC at 60 Hz. It is designed for transferring fluids such as 50/50 antifreeze and diesel exhaust fluid. The unit includes an 18 ft discharge hose with a 3/4 in inside diameter and a 72 in power cord. Thermal protection is built into the motor for safety during operation.

Upgrading from manual or unpowered transfer methods

This pump replaces hand-operated or gravity-fed dispensing with a self-priming electric motor delivering a maximum flow rate of 43/64. The jump is worth it when consistent 22 psi outlet pressure is required for steady, controlled dispensing. Automatic nozzle operation removes the need for manual valve control during fill cycles. It cannot run dry, so the fluid source must remain primed throughout use.

Integrating into a fluid dispensing station

The pump connects via a 1 in pump connection ID and requires a 120 V AC power supply. The 18 ft hose and 72 in cord determine placement relative to the drum and outlet. No bung adapter is included, so a separate mount must be sourced for drum installation. Self-priming capability simplifies startup, while thermal protection guards the motor during extended duty cycles.

Highlights

  • Self-priming design starts quickly without manual effort
  • 18 ft discharge hose reaches distant fill points
  • 120 V AC corded power suits standard workshop outlets
  • 22 psi maximum pressure handles diesel exhaust fluid and antifreeze
  • Automatic nozzle stops flow when container is full

Specifications

BrandPIUSI

Questions about this item

What size bung opening does the 1 in pump connection require?

The pump connection has a 1 in inner diameter, so it fits a standard 2 in NPT bung opening on drums or totes.

How do I wire the 120 V AC corded electric motor correctly?

Plug the 72 in cord into a grounded 120 V AC, 60 Hz outlet; the thermal protection trips if the motor overheats, so ensure the circuit can handle the inrush current.

How often should I replace the 18 ft discharge hose?

Inspect the 3/4 in inside diameter hose before each use; replace it when cracks, stiffness or leaks appear, typically after one to two seasons with diesel exhaust fluid or antifreeze.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.