We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel coupler with 90-degree hose barb outlet

Piusi

Piusi 1536000 Coupler accessory

SKU CH-RV1G-KCTBQ

Stainless-steel coupler with Viton seal, 90-degree hose-barb outlet, rated to 50 psi and ISO22241 compliant for diesel exhaust fluid

  • Stainless-steel body resists corrosion
  • Viton seal handles 12–104 °F fluid range
  • 90° outlet eases hose routing in tight spots
  • 3/4″ hose barb gives secure tote connection
  • ISO 22241 compliant for DEF systems

Piusi 1536000 Coupler

The Piusi 1536000 coupler connects fluid-transfer equipment using a stainless-steel body and Viton seals. It suits workshops and mobile service units that need a 90-degree outlet on a 3/4-inch hose barb. Builders who require a straight-through fitting or a different thread standard cannot use this part.

Capacity and headroom

The coupler operates between 12 and 104 degrees Fahrenheit and withstands up to 50 psi. It handles diesel exhaust fluid and other media compatible with EPDM, polypropylene and stainless-steel wetted materials. Systems running hotter, colder or above the pressure limit will exceed its safe range.

ISO 22241 compliance

Agency compliance is certified to ISO22241, confirming the materials meet the standard for diesel exhaust fluid handling. Installations that must follow this specification can select the coupler with confidence. Projects governed by a different fluid-standard must verify suitability independently.

Highlights

  • Stainless-steel body resists corrosion
  • Viton seal handles 12–104 °F fluid range
  • 90° outlet eases hose routing in tight spots
  • 3/4″ hose barb gives secure tote connection
  • ISO 22241 compliant for DEF systems

Specifications

BrandPIUSI

Questions about this item

Will the 3/4 in hose barb on this Piusi 1536000 coupler connect to the 3/4 in hose I already use?

Yes, the threaded connection is a 3/4 in hose barb sized for 3/4 in inside-diameter hose, so your existing hose fits directly.

How can I verify the coupler is sealing properly once installed?

Pressurise the line up to the 50 psi maximum operating pressure and check for leaks at the Viton seal and the 90-degree outlet; no fluid should escape.

Does the box include the 2 1/2 in tote fitting, or must I order it separately?

The coupler body with its 2 1/2 in tote connection, 3/4 in hose barb and 90-degree outlet is supplied complete; no separate tote fitting is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.