PISKEKAT
PISKEKAT Vari Dual Monitor Arm 27" 19.8 lbs 360° VESA 75x75 100x100 server rack
Mounts two 27″ monitors up to 30.9 lbs each on 75×75 or 100×100 VESA with 360° articulation and 12″ height adjustment
- TypeMounting Racks
- Frees desk space by lifting two monitors up to 27 inches
- Raises screens 12 inches for ergonomic eye-level viewing
- Full 360 degree rotation with tension-assisted adjustment
- Compatible with VESA 75x75 and 100x100 mounting patterns
- Clamps to desks up to 1.375 inches thick in minutes
Dual 27" VESA Monitor Arm
The Vari Dual Monitor Arm clamps to a desk and holds two screens up to 27 inches wide and 30.9 lbs each. It suits offices or home workstations that need to reclaim desk surface and set both displays at eye level. VESA 75x75 mm and 100x100 mm patterns are supported. Monitors with a 16:9 aspect ratio are recommended.
Clamp Install and Cable Routing
The universal desk clamp fits tops up to 1.375 inches thick and installs in minutes with basic tools. Each arm articulates fully and rotates 360 degrees on a tension-assisted joint so screens move smoothly without drifting. Cable clips keep runs tidy along the arms. Very thick or glass desks may not accept the clamp securely.
Desk Thickness and Monitor Specs
Verify your desk thickness does not exceed 1.375 inches before ordering. Confirm each monitor weighs 30.9 lbs or less and carries a VESA 75x75 or 100x100 mount. Screens wider than 27 inches or heavier than the rated limit will not be supported. Non-16:9 aspect ratios may not align correctly on the arms.
Highlights
- Frees desk space by lifting two monitors up to 27 inches
- Raises screens 12 inches for ergonomic eye-level viewing
- Full 360 degree rotation with tension-assisted adjustment
- Compatible with VESA 75x75 and 100x100 mounting patterns
- Clamps to desks up to 1.375 inches thick in minutes
Specifications
| Type | Mounting Racks |
|---|
Questions about this item
How can I confirm the arms hold both 27" monitors at the rated 30.9 lbs each after installation?
Verify each screen sits level at the desired height, rotates 360 degrees without drift, and the tension-assisted joints keep position when you release the monitor.
What hardware comes in the box and what must I supply for a desk up to 1.375 thick?
The package includes the dual arms, VESA 75x75 and 100x100 plates, and a universal desk clamp; you only need a monitor with a matching VESA pattern and a desk no thicker than 1.375.
Should I choose this model if my screens are 27" and weigh 19.8 lbs each?
Yes — the arm supports monitors up to 27 inches wide and 30.9 lbs per arm, so 19.8 lb panels are well within the limit.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



