PISKEKAT
PISKEKAT Tenda TEG1016M 16 Port Gigabit Switch Unmanaged Ethernet Switch Traffic Optimization
A 16-port Gigabit switch with plug-and-play setup, fanless metal housing and traffic optimisation for quiet, reliable network expansion
- TypeOther
- Plug-and-play setup with no configuration needed
- 16 Gigabit RJ45 ports expand wired connectivity
- 32 Gbps switching capacity handles heavy traffic
- Fanless metal chassis runs silently and cool
- 6 KV lightning protection safeguards every port
16-port Gigabit switch for small networks
The PISKEKAT Tenda TEG1016M provides sixteen 10/100/1000 Mbps auto-negotiating RJ45 ports for expanding wired connectivity. It suits homes, offices or mesh backbones that need extra drops without managed complexity. Plug-and-play operation means no configuration or software is required. A 32 Gbps switching capacity and 2 MB buffer handle heavy multi-device traffic.
Fanless metal chassis for silent heat dissipation
A fanless all-metal enclosure eliminates moving-part noise while acting as a heatsink for quiet, reliable operation. IEEE 802.3X flow control regulates data streams to prevent packet loss under load. Each port and the power module include 6 KV lightning protection to guard against surge damage. The design targets continuous uptime in noise-sensitive environments.
Replaces slower or smaller unmanaged switches
The jump from 100 Mbps or 8-port models is worthwhile when file transfers, backups or streaming saturate existing links. Buyers who need managed features such as VLANs, QoS or link aggregation should look elsewhere. The 10K jumbo frame support benefits large-file workflows but offers no advantage for typical internet browsing. Lifetime technical support backs the hardware.
Highlights
- Plug-and-play setup with no configuration needed
- 16 Gigabit RJ45 ports expand wired connectivity
- 32 Gbps switching capacity handles heavy traffic
- Fanless metal chassis runs silently and cool
- 6 KV lightning protection safeguards every port
Specifications
| Type | Other |
|---|
Questions about this item
How do I install the TEG1016M and what step do people often miss?
Connect each device to one of the 16 10/100/1000Mbps auto-negotiating MDIX RJ45 ports; the step users miss is confirming every link light shows Gigabit speed instead of 100Mbps.
What maintenance or replacement will the TEG1016M need later?
The fanless metal chassis has no moving parts to service; only the external power adapter may need replacement if it fails after years of use.
What limit appears first on the TEG1016M under sustained heavy traffic?
The 2M buffer and 32Gbps switching capacity set the ceiling; once aggregate throughput exceeds 32Gbps or large bursts fill the 2M buffer, frames are dropped.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



