PISKEKAT
PISKEKAT Security Camera Mount Bracket 11.6in Beige
Weatherproof aluminium bracket holds outdoor cameras with 180-degree tilt, 45-degree swivel and a hidden cable channel for indoor or outdoor mounting
- TypeSecurity Camera
- Adjustable viewing with 180° tilt and 45° swivel
- Durable aluminium construction resists weather and corrosion
- 6 in length suits most outdoor camera housings
- Internal cable routing protects wires from damage
- Ceiling or wall installation for flexible placement
Universal Camera Bracket
This aluminium mounting bracket fits most brands of outdoor camera housing and replaces plastic stands with a heavier metal construction. The beige finish suits exterior walls and soffits. It is intended for installers who need a single bracket that works with dome, bullet and IP cameras.
Tilt, Swivel and Cable Routing
A tilt range of 180 degrees and a swivel range of 45 degrees let you aim the camera precisely after the bracket is fixed. One screw locks the angle while a second screw either frees the joint or holds it fast. A hidden hole through the bracket feeds cables directly into the camera housing, protecting wiring from weather and tampering.
Simple Wall or Ceiling Install
The bracket mounts to wall or ceiling with standard fixings and requires only basic hand tools. The two-screw adjustment system means you can level the camera before tightening the final lock. Installers who need a longer reach than 11.6 inches or a different colour will need a separate solution.
Highlights
- Adjustable viewing with 180° tilt and 45° swivel
- Durable aluminium construction resists weather and corrosion
- 6 in length suits most outdoor camera housings
- Internal cable routing protects wires from damage
- Ceiling or wall installation for flexible placement
Specifications
| Type | Security Camera |
|---|
Questions about this item
Does the aluminium bracket need any lubrication or parts replacement over time?
The bracket is a single aluminium piece with no moving mechanisms that wear out, so no lubrication or spare parts are required.
Will the 180-degree tilt joint loosen if the camera is repositioned frequently?
The tilt is locked by a set screw; tightening it after each adjustment keeps the joint secure under repeated use.
Does the bracket get hot or draw power when the camera runs continuously?
The mount is passive aluminium — it generates no heat and consumes no electricity regardless of how long the camera operates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



