We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown RG-316 coaxial cable on spool, thin .1 in diameter, 50 ft length

PISKEKAT

PISKEKAT RG-316 Coax Cable 50 ft Brown

SKU CH-ENKH-15VZ2

A 50 ft RG-316 coaxial cable with .1 in diameter, silver-plated copper conductors and a Teflon jacket for low-loss RF runs up to 6 GHz

  • TypeOther
  • Extra-flexible routing with a 0.1 in diameter
  • Low-loss signal path up to 6 GHz with 0.45 dB/ft at 3 GHz
  • Excellent impedance match shown by 1.15 VSWR
  • Silver-plated copper conductor and braid for efficient transmission
  • Durable Teflon jacket withstands harsh outdoor environments

Miniature RG-316 coaxial cable for RF projects

This 50 ft RG-316 coaxial cable is a miniature design with a 0.1 in diameter that remains thin, lightweight and flexible. The stranded silver-plated copper core and silver-plated copper braid deliver low signal loss up to 6 GHz. A flexible Teflon jacket withstands harsh outdoor environments. It suits VHF, UHF, ham radio, 4G LTE, ADS-B and Wi-Fi antenna interconnections.

Verify connector and frequency needs before ordering

The cable is supplied as raw coaxial line without pre-fitted connectors, so you must add SMA or other plugs yourself. Confirm that your application operates within the 6 GHz maximum frequency and that the 0.45 dB per foot attenuation at 3 GHz is acceptable for your link budget. Ensure you have suitable crimping tools and connector types for the 50 ohm impedance.

Durable Teflon jacket

The flexible Teflon outer jacket resists weathering and abrasion during repeated routing through tight spaces or outdoor runs. Stranded silver-plated copper conductors keep the cable pliable so it bends without kinking when you reposition antennas or test equipment. The 1.15 VSWR indicates a good impedance match, helping maintain consistent performance across the supported frequency range.

Highlights

  • Extra-flexible routing with a 0.1 in diameter
  • Low-loss signal path up to 6 GHz with 0.45 dB/ft at 3 GHz
  • Excellent impedance match shown by 1.15 VSWR
  • Silver-plated copper conductor and braid for efficient transmission
  • Durable Teflon jacket withstands harsh outdoor environments

Specifications

TypeOther

Questions about this item

Does the PISKEKAT RG-316 coax cable ship with connectors already attached, or must I buy SMA plugs separately?

The cable is supplied as a plain 50 ft length with no connectors fitted; you will need to purchase and crimp your own SMA or other RF plugs.

The listing mentions RG-316 and a .1 in diameter — are there alternative jacket types or gauges in this same product line?

Only the single RG-316 variant with a .1 in Teflon jacket is offered here; no other diameters or jacket materials are listed for this item.

What does the .45 dB per foot attenuation at 3 GHz mean for a full 50 ft run in my ham radio setup?

At 3 GHz the cable loses .45 dB per foot, so the 50 ft length will attenuate the signal by the rated amount before any connector loss is added.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.