PISKEKAT
PISKEKAT NP03XL 761230-005 laptop battery
Replaces HP Envy X360 and Pavilion X360 batteries with a 43 Wh lithium-ion pack rated at 11.4 V
- Battery TypeLaptop Batteries
- Ready-to-install kit includes two screwdrivers
- 4 V 43 Wh capacity restores original runtime
- Grade A lithium-ion cells support fast charging
- CE FCC RoHS certified for safety compliance
- Direct replacement for HP Envy X360 15 and Pavilion X360 13 series
Direct replacement for HP Envy X360
This NP03XL 761230-005 battery fits a long list of HP Envy X360 15 and Pavilion X360 13 models, including the 15-U011DX, 15-U111DX and 13-A013CL. It replaces original part numbers such as 760944-421 and HSTNN-LB6L. The unit ships new and includes two screwdrivers so the swap can be done without hunting for tools.
Four Grade A lithium-ion cells with CE.
The pack uses four A+ cells rated at 11.4V and 43Wh (3720mAh). Circuit protection guards against overcharge and overdischarge. Black casing matches the original aesthetic and the included screwdrivers suit the chassis screws on the supported Envy and Pavilion X360 models.
Upgrade from a worn or swollen original battery
When the factory pack no longer holds a charge or shows physical swelling, this unit restores full runtime without changing the laptop's power profile. It is not for machines outside the listed Envy X360 15 and Pavilion X360 13 series, nor for users needing a higher-capacity design than the standard 43Wh.
Highlights
- Ready-to-install kit includes two screwdrivers
- 4 V 43 Wh capacity restores original runtime
- Grade A lithium-ion cells support fast charging
- CE FCC RoHS certified for safety compliance
- Direct replacement for HP Envy X360 15 and Pavilion X360 13 series
Specifications
| Battery Type | Laptop Batteries |
|---|
Questions about this item
What voltage and capacity does the NP03XL 761230-005 battery provide?
The battery is rated at 11.4V with a capacity of 43Wh and 3720mAh, using four A+ grade lithium-ion cells.
Which screws and tools are needed to install this battery in a compatible HP laptop?
The pack includes two screwdrivers matched to the laptop's case screws; no other tools are required for the replacement.
What is the correct sequence to install the NP03XL 761230-005 and avoid the common mistake of skipping the calibration cycle?
Power off the laptop, disconnect the AC adapter, remove the bottom case screws with the supplied drivers, swap the battery, reassemble, then charge to 100 percent and run a full discharge before regular use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



