We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical metal NAS case for Raspberry Pi with dual 2.5 SSD bays, matte black finish

PISKEKAT

PISKEKAT NAS Case Dual 2.5 SSD Raspberry Pi 5 4 3B office equipment

SKU CH-SH0Q-40RF0

Vertical metal case holds two 2.5″ SSDs and a Raspberry Pi 5, 4 or 3B for a compact NAS build

  • TypeOffice Machines - Multifunctional
  • Bigger network-attached storage for Raspberry Pi with dual 2.5 SSDs
  • Quick assembly — insert drives, secure screws, mount board and base
  • Sturdy carbon-steel frame with matte black powder-coat finish
  • Rounded plate corners remove sharp edges for safe handling
  • Run NAS, surveillance or web server using OpenMediaVault software

NAS case for dual 2.5 SSDs

This metal enclosure holds two 2.5 inch SSDs and a Raspberry Pi board, turning the single-board computer into a compact network-attached storage device. It supports Pi 5, 4, 3B and 2B models for home or small-office file serving.

Passive steel chassis

The carbon-steel frame with matte black powder coat acts as a heatsink, so the drives and Pi run without added fans. No moving parts means silent operation and no extra power draw beyond the boards themselves.

SATA adapters not included

The kit provides only the case, mounting hardware and manual; you must supply SATA-to-USB adapters to connect the drives. Builders who need those adapters pre-installed should look elsewhere.

Highlights

  • Bigger network-attached storage for Raspberry Pi with dual 2.5 SSDs
  • Quick assembly — insert drives, secure screws, mount board and base
  • Sturdy carbon-steel frame with matte black powder-coat finish
  • Rounded plate corners remove sharp edges for safe handling
  • Run NAS, surveillance or web server using OpenMediaVault software

Specifications

TypeOffice Machines - Multifunctional

Questions about this item

How do I install the SATA adapters for the 2.5 SSDs in this case?

The SATA to USB adapters are not included with the case; you must buy them separately and connect each SSD to the Raspberry Pi via USB.

What maintenance will the carbon steel chassis need over time?

The matte black powder coat finish resists chips and corrosion, so no routine maintenance is required beyond occasional dusting.

What limits storage speed when using dual SSDs under sustained load?

Each SSD connects through a USB interface on the Raspberry Pi, so the USB bus bandwidth is the first bottleneck during heavy transfers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.