We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver vertical quad monitor stand with four articulated arms on tall pole, C-clamp base, cable clips

PISKEKAT

PISKEKAT MOUNT PRO Quad Monitor Stand 13-27in 17.6lbs VESA 75x75 100x100

SKU CH-3R3H-7ACW7

Quad desk mount holds four 13-to-27-inch screens up to 17.6 lb each with VESA 75 and 100 patterns, +90°/-90° tilt, 180° swivel, 360° rotation and a 31.7-inch pole

  • TypeServer
  • Supports screens from 13 to 27 inches with VESA 75x75 and 100x100 patterns
  • Each arm holds up to 17.6 lbs for secure mounting of four monitors
  • Full motion range with 90° tilt, 180° swivel and 360° rotation
  • Pole reaches 31.7 inches for sitting or standing ergonomic height
  • Clamps desks 0.59 to 3.15 inches thick and includes cable clips

Four-Screen Desk Mount

The PISKEKAT MOUNT PRO holds four flat or curved monitors from 13 to 27 inches. Each arm supports up to 17.6 lbs and fits VESA 75x75 mm and 100x100 mm patterns. It suits traders, analysts or multi-tasking professionals who need a single vertical column. It is not for buyers whose screens exceed the weight limit or lack VESA holes.

Adjustment Range and Build

The steel pole reaches 31.7 inches high for sitting or standing eye levels. Arms tilt +90° to -90°, swivel 180° and rotate 360° for stacked or side-by-side layouts. The C-clamp and grommet base accepts desk thicknesses from 0.59 to 3.15 inches. No motorised or pneumatic movement is included.

Included Hardware

Labeled parts and printed instructions enable tool-assisted assembly in one session. Integrated cable clips route wires along the column to reduce desk clutter. No software, drivers or quick-release VESA plates are supplied. Buyers needing toolless screen swaps must source adapters separately.

Highlights

  • Supports screens from 13 to 27 inches with VESA 75x75 and 100x100 patterns
  • Each arm holds up to 17.6 lbs for secure mounting of four monitors
  • Full motion range with 90° tilt, 180° swivel and 360° rotation
  • Pole reaches 31.7 inches for sitting or standing ergonomic height
  • Clamps desks 0.59 to 3.15 inches thick and includes cable clips

Specifications

TypeServer

Questions about this item

How do I mount the MOUNT PRO quad stand on a 1.5 in thick desk using the C-clamp?

Open the clamp jaws past 1.5 in, set the base on the desktop, tighten the bolt until the rubber pads grip firmly, then attach the 31.7 in pole before hanging any monitors.

What maintenance will the gas-spring arms need after a year of daily height changes?

Wipe the chrome shafts monthly with a dry cloth; if an arm drifts, tighten the tension bolt at the pivot until the screen stays at +90° to -90° tilt without sag.

At what combined load does the 31.7 in pole start to flex when all four screens are tilted forward?

The pole is rated for 17.6 lbs per arm; keep the total suspended weight under that per-mount limit and centre each VESA 75x75 or 100x100 plate to minimise forward lean.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.