We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal monitor riser with three adjustable height settings and pen storage tray

PISKEKAT

PISKEKAT Monitor Riser MST013 14.56x9.25in 3-Height 44lb

SKU CH-A0G2-EQBM0

A foldable metal monitor riser with three height settings at 4.5, 5.2 and 5.9 inches, holding up to 44lb on a 14.56 x 9.25in tray and including pen storage

  • TypeMounting Racks
  • Elevates screens to reduce neck strain with three height settings at 4.5, 5.2 and 5.9 inches
  • Supports heavy monitors up to 44lbs on a sturdy metal tray and legs
  • Creates desk space by lifting devices off the surface and includes a pen storage slot
  • Ready to use immediately with no assembly or installation required
  • Fits monitors, laptops, printers and other gear on a 14.56 by 9.25 inch platform

Foldable metal monitor riser

The PISKEKAT MST013 is a foldable metal stand that lifts monitors, laptops, printers or media players to a healthier viewing height. It requires no installation and includes a built-in pen storage slot. The compact tray suits home offices and shared workspaces where desk space is limited.

Three fixed height settings

The riser offers three discrete height positions at 4.5, 5.2 and 5.9 inches. Users cannot fine-tune the elevation between these steps, so the ideal ergonomic height must match one of the preset levels. The fixed increments suit standard desk setups but restrict custom positioning.

44 lb load capacity on a 14.56 x 9.25 in tray

The metal tray and legs support devices up to 44 lbs, covering most monitors and all-in-one printers. Heavier multi-monitor arrays or large format displays exceed the rated limit. The tray footprint accommodates typical monitor bases but may not fit oversized stands.

Highlights

  • Elevates screens to reduce neck strain with three height settings at 4.5, 5.2 and 5.9 inches
  • Supports heavy monitors up to 44lbs on a sturdy metal tray and legs
  • Creates desk space by lifting devices off the surface and includes a pen storage slot
  • Ready to use immediately with no assembly or installation required
  • Fits monitors, laptops, printers and other gear on a 14.56 by 9.25 inch platform

Specifications

TypeMounting Racks

Questions about this item

Which of the three height settings — 4.5, 5.2 or 5.9 inches — should I choose?

Pick the setting that puts the top of your screen at or just below eye level when you sit upright; 4.5 in works for lower chairs, 5.9 in for taller users or standing desks, and 5.2 in is a middle ground.

What does the 44 lb load rating mean once the riser is on my desk?

It means the metal tray and legs can safely support any monitor, laptop, printer or media player weighing up to 44 lb without bending or tipping.

The riser just sits on the desk — what does that cap in practice?

Because there is no clamping or bolting, stability depends on the desk surface; the 14.56 × 9.25 in footprint and 44 lb rating keep wobble low for centred loads.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.