We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver steel monitor arm stand with adjustable joints and VESA mounting plate

PISKEKAT

PISKEKAT MD7821 Monitor Arm Stand 13-32in VESA 75 100 800mm

SKU CH-D874-P6NBR

Frees desk space by holding one 13–32 inch monitor up to 22 lbs on a strong steel arm with 75×75 or 100×100 VESA, ±80° tilt, ±90° swivel.

  • TypeServer
  • Frees desk space with strong steel arm supporting 13-32 inch screens
  • Holds up to 22lbs load capacity for secure mounting
  • Adjusts 800mm height with ±80 tilt, ±90 swivel and 360 rotation
  • Compatible with 75x75mm and 100x100mm VESA mounting patterns
  • Offers c-clamp and grommet base installation options for flexibility

Single Monitor Arm for 13-32 Inch Screens

This steel arm supports one monitor from 13 to 32 inches with a maximum load of 22lbs. It attaches via 75x75mm or 100x100mm VESA patterns. The design frees desk space by lifting the display off the surface. Installation uses either a C-clamp or grommet base.

VESA 75 and 100 Mounting Limits

The arm only fits monitors with 75mm or 100mm hole spacing. Screens outside the 13-32 inch range or heavier than 22lbs are not supported. Tilt adjustment reaches ±80 degrees and swivel reaches ±90 degrees. Full 360 degree rotation is available for portrait or landscape orientation.

800mm Height Adjustment Range

The vertical pole provides 800mm of height travel to set the screen at eye level. This range decides whether the arm suits a standing desk or a low seating position. Buyers needing greater vertical reach should look elsewhere. All mounting hardware and instructions are included.

Highlights

  • Frees desk space with strong steel arm supporting 13-32 inch screens
  • Holds up to 22lbs load capacity for secure mounting
  • Adjusts 800mm height with ±80 tilt, ±90 swivel and 360 rotation
  • Compatible with 75x75mm and 100x100mm VESA mounting patterns
  • Offers c-clamp and grommet base installation options for flexibility

Specifications

TypeServer

Questions about this item

Should I pick the 75 mm or 100 mm VESA holes for my screen?

Measure the distance between the four mounting holes on the back of your monitor; use the 75 mm pattern if they are 75 mm apart, otherwise use the 100 mm pattern.

What does the 800 mm height adjustment actually give me at my desk?

The arm can raise or lower the monitor through an 800 mm vertical range so you can set the screen centre at eye level whether seated or standing.

How does the C-clamp versus grommet base choice affect mounting?

The C-clamp grips the rear edge of a desk up to its maximum thickness, while the grommet base bolts through a pre-drilled hole; both support the full 22 lb load and 800 mm height travel.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.