We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square magnetic build plate 235 by 235 mm with flexible textured top sheet and adhesive magnetic base

PISKEKAT

PISKEKAT Magnetic Build Surface 235x235 mm 3D Printer Accessory

SKU CH-0QAG-9JHRK

A removable magnetic build plate measuring 235 x 235 mm that flexes to release finished prints without tools

  • TypeOther
  • Removable magnetic surface enables hassle-free model removal
  • Flexible upper sheet bends to pop prints off easily
  • Magnetic base installs once, then top layer swaps in seconds
  • Cut to custom dimensions for any 235 mm printer bed
  • Heat bed for 2-3 minutes before lifting prints cleanly

Magnetic Build Surface 235x235 mm

This removable magnetic build surface fits Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 3 Neo, Ender 3 S1, Ender 3 S1 Pro and Ender 5 Pro printers. It provides a flexible top layer that simplifies model removal for FDM printing. The 235x235 mm size matches the stock heated bed on these machines.

Magnetic adhesion and heat limits

The surface relies on magnetic attraction between the upper flexible sheet and the lower magnetic base. Correct polarity must be found before installation; if the layers repel, rotate the top sheet 90 degrees until they lock. The supplier advises heating the bed for two to three minutes before removing a finished model to ensure clean release.

Installation steps and common issues

Installation requires sticking the lower magnetic base to the hot bed, then placing the upper surface on top with the correct magnetic orientation. The flexible top sheet can be cut to other dimensions if needed. Builders who need a larger print area than 235x235 mm or a non-magnetic mounting method will need a different solution.

Highlights

  • Removable magnetic surface enables hassle-free model removal
  • Flexible upper sheet bends to pop prints off easily
  • Magnetic base installs once, then top layer swaps in seconds
  • Cut to custom dimensions for any 235 mm printer bed
  • Heat bed for 2-3 minutes before lifting prints cleanly

Specifications

TypeOther

Questions about this item

Which size of the PISKEKAT magnetic build surface matches my Ender 3 V2 heated bed?

The sheet measures 235 x 235 mm, which is the standard bed size for the Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 V2 Neo, Ender 3 Neo, Ender 3 S1, Ender 3 S1 Pro and Ender 5 Pro printers listed in the compatibility information.

How does the magnetic surface behave once it is heated on the printer?

The flexible top layer stays magnetically locked to the base sheet during printing; after a 2 to 3 minute warm-up you lift the top sheet, bend it slightly and the finished model releases cleanly without tools.

What limits the way the magnetic base attaches to the hot bed?

The base layer uses a pressure-sensitive adhesive that bonds to any clean, flat metal or glass bed, so the only practical limit is the 235 x 235 mm footprint — it can also be trimmed smaller if needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.