We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black wooden monitor riser with adjustable steel legs, three storage compartments, holds two screens

PISKEKAT

PISKEKAT Dual Monitor Stand Riser Black 29.2-42.5" 3.7-5.2" 15° 100lbs

SKU CH-741J-GS01M

Adjustable-width steel riser holds two monitors up to 100 lbs, lifts them 3.7–5.2 in., tilts 0–15°, and adds three storage bays underneath

  • TypeMounting Racks
  • Adjustable width from 29.2" to 42.5" fits most monitors
  • Height adjustable steel legs from 3.7" to 5.2" improve viewing comfort
  • Forward tilt up to 15° sets a comfortable screen angle
  • Three storage spaces beneath the shelf keep desk accessories organised
  • Supports up to 100lbs with non-slip rubber pads for stability

Dual Monitor Stand Riser 29.2-42.5

This adjustable-width monitor riser supports two screens and accessories up to 100lbs. The steel legs with rubber pads prevent slipping on desk surfaces. Length extends from 29.2 to 42.5 inches to fit most monitors, laptops, and printers. Three storage compartments underneath hold keyboards, files, and small office items.

Height Adjustable 3.7-5.2" Tilt 0-15°

Leg height adjusts between 3.7 and 5.2 inches for ergonomic viewing. Forward tilt ranges from zero to 15 degrees to reduce glare and improve posture. Assembly uses screws to join the base frame and side frames to the centre section. The structure is designed for desk mounting only and does not attach to VESA patterns or wall brackets.

100lbs Maximum Load Capacity

The single specification that decides suitability is the 100lbs (45kg) weight limit across the full width. Exceeding this rating risks instability or damage to the steel frame and rubber feet. Buyers with heavier multi-monitor arrays or large-format displays above this limit should not use this riser.

Highlights

  • Adjustable width from 29.2" to 42.5" fits most monitors
  • Height adjustable steel legs from 3.7" to 5.2" improve viewing comfort
  • Forward tilt up to 15° sets a comfortable screen angle
  • Three storage spaces beneath the shelf keep desk accessories organised
  • Supports up to 100lbs with non-slip rubber pads for stability

Specifications

TypeMounting Racks

Questions about this item

Should I pick the shorter or longer width setting for two monitors?

The stand telescopes from 29.2" to 42.5", so choose the length that matches the combined width of your screens plus a small gap on each side.

What does the 100lbs rating mean when the stand is on my desk?

It confirms the steel frame and non-slip feet can hold two typical monitors, a laptop or a printer up to 45 kg without flexing.

How does the 0-15° tilt range work with the 3.7-5.2" height adjustment?

You set the legs between 3.7" and 5.2" high, then tilt the top platform forward up to 15° for the viewing angle you prefer.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.