We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual-monitor gas-spring desk mount with two articulated arms and C-clamp base

PISKEKAT

PISKEKAT Dual Monitor Gas Spring Mount 17-32in 19.8lbs Black

SKU CH-91W4-291M6

A gas-spring arm holds two 17 to 32 inch monitors up to 19.8 lbs each, tilting 75 degrees up or 45 down, swivelling 90 degrees and rotating 180 degrees, clamping to desks 0.4 to 3.3 inches thick

  • TypeServer
  • Ergonomic viewing with tilt +75°/-45°, swivel +90°/-90°, rotate +180°/-180°
  • Fits two screens 17 to 32 inches, each up to 19.8 lbs
  • Gas-spring arms extend and retract for precise height adjustment
  • VESA 75x75mm and 100x100mm patterns, tool-free monitor swaps
  • C-clamp or grommet base fits desks .4 to 3.3 inches thick

Dual Monitor Gas Spring Mount 17-32in

This gas spring mount holds two screens sized 17 to 32 inches with a maximum weight of 19.8lbs each. It suits office workers and home users who want to reclaim desk surface while positioning displays at eye level. The unit ships new and includes all mounting hardware and a user manual.

Installation ease and common issues

Two mounting options are supplied: a C-clamp for desks .4 to 3.3 inches thick and a grommet base for the same thickness range. The two-stage locking system secures the column to either base. Monitors attach via detachable VESA plates with 75x75mm or 100x100mm hole patterns. The most frequent issue is forgetting to match the plate pattern to the monitor before tightening the arms.

Pre-order setup checks

Verify that each monitor falls within the 17 to 32 inch size limit and does not exceed 19.8lbs. Confirm the monitor rear has either 75x75mm or 100x100mm VESA holes. Measure desk thickness to ensure it sits between .4 and 3.3 inches for the chosen mounting method. Ensure enough rear clearance exists for the gas spring arm to extend and retract fully.

Highlights

  • Ergonomic viewing with tilt +75°/-45°, swivel +90°/-90°, rotate +180°/-180°
  • Fits two screens 17 to 32 inches, each up to 19.8 lbs
  • Gas-spring arms extend and retract for precise height adjustment
  • VESA 75x75mm and 100x100mm patterns, tool-free monitor swaps
  • C-clamp or grommet base fits desks .4 to 3.3 inches thick

Specifications

TypeServer

Questions about this item

How can I confirm the gas spring arms are holding my monitors at the correct height after installation?

Raise each monitor to eye level and release; the high-grade steel gas spring should keep it steady without drifting. Verify the tilt range of +75°/-45°, swivel of +90°/-90°, and rotation of +180°/-180° move smoothly and lock in place.

What hardware is included for mounting and what must I supply myself?

The box contains the dual monitor gas spring mount in black, a mounting hardware kit, and a user manual. You must provide two monitors with detachable 75x75mm or 100x100mm VESA holes, each weighing no more than 19.8lbs, and a desk between .4 and 3.3 inches thick for the C-clamp or grommet base.

Which monitors are compatible with the 75x75mm and 100x100mm mounting holes?

Any display from 17 to 32 inches that uses a detachable 75x75mm or 100x100mm VESA pattern and weighs up to 19.8lbs will fit both hole patterns supplied with the mount.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.