PISKEKAT
PISKEKAT Dual Band 2.4/5.8 GHz 10 dBi RP-SMA Server Rack Antenna (2 pcs)
Two omni-directional RP-SMA antennas covering 2.4 GHz and 5.8 GHz bands with 10 dBi gain for routers, PCI-E cards and IP cameras
- TypeServer
- Dual-band 2.4 GHz and 5.8 GHz coverage extends wireless reach
- 10 dBi gain strengthens signal for routers and adapters
- Omni-directional pattern radiates evenly without aiming
- RP-SMA screw-on swivel connector fits most PCIe cards and USB dongles
- Two antennas included for MIMO or diversity configurations
Dual-band 2.4 / 5.8 GHz server-rack antenna pair
Two omni-directional antennas cover 2400-2500 MHz and 4900-5900 MHz with 10 dBi gain. Each unit uses an RP-SMA male screw-on swivel connector. The pair suits servers, PCI-E cards, USB adapters and IP cameras needing broader wireless coverage.
RP-SMA connector check before ordering
Verify that your router, card or camera exposes an RP-SMA female jack; the supplied plugs are male and will not mate with standard SMA or other thread types. Confirm the device operates on both 2.4 GHz and 5.8 GHz bands to use the full frequency range.
Passive thermal and silent operation
No active cooling or power draw is involved; the antennas add negligible heat to a rack and produce zero noise. Normal use simply requires secure hand-tightening of the swivel bases for optimal signal orientation.
Highlights
- Dual-band 2.4 GHz and 5.8 GHz coverage extends wireless reach
- 10 dBi gain strengthens signal for routers and adapters
- Omni-directional pattern radiates evenly without aiming
- RP-SMA screw-on swivel connector fits most PCIe cards and USB dongles
- Two antennas included for MIMO or diversity configurations
Specifications
| Type | Server |
|---|
Questions about this item
What comes in the box and do I need any extra cables or adapters?
The package includes two omni-directional antennas with RP-SMA male connectors. No additional cables or adapters are required if your device has matching RP-SMA female ports.
Should I choose these 10 dBi antennas over a lower-gain option for my router?
The 10 dBi gain focuses signal horizontally, which suits long-range coverage on a single floor. Lower-gain antennas spread energy more vertically, better for multi-storey use.
What does the 10 dBi figure mean once the antennas are fitted to my ASUS RT-AC68U?
At 2.4 GHz (2400 - 2500 MHz) and 5.8 GHz (4900 - 5900 MHz) the 10 dBi gain increases horizontal reach compared with the stock antennas, improving range for devices on the same level.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



