We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black vented steel cantilever shelf for 19 inch rack 1U 250mm deep

PISKEKAT

PISKEKAT Cantilever Server Shelf 19inch 1U 10inch 250mm Deep

SKU CH-Y71N-M8H3F

A vented cantilever shelf fits 19-inch racks, holds tower units or monitors, and supports up to 50LB

  • TypeOffice Machines - Multifunctional
  • Fits 19" standard racks for tower units and monitors
  • Cold-rolled steel with powder coat resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Lightweight yet durable construction supports up to 50LB load
  • M6 screws and cage nuts included for quick installation

19-inch rack cantilever shelf

This 1U cantilever shelf mounts to standard 19-inch racks and provides a 10-inch deep platform for tower units, monitors or other equipment. The open-front design leaves the rear of the mounted device accessible for cables and ventilation.

Steel construction with slotted venting

Cold-rolled steel with a powder-coated finish resists rust and corrosion while keeping the shelf light. A pattern of ventilation slots across the surface promotes airflow around the installed equipment during normal operation.

Included M6 mounting hardware

M6 screws and cage nuts are supplied so the shelf can be secured to the rack immediately. The hardware supports the rated 50LB load capacity without requiring separate fastener kits.

Highlights

  • Fits 19" standard racks for tower units and monitors
  • Cold-rolled steel with powder coat resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Lightweight yet durable construction supports up to 50LB load
  • M6 screws and cage nuts included for quick installation

Specifications

TypeOffice Machines - Multifunctional

Questions about this item

How do I mount this 19-inch 1U cantilever shelf and which step causes the most alignment problems?

Use the included M6 screws and cage nuts to secure the shelf to the front rack rails only; the step most people miss is confirming both cage nuts are fully seated before tightening, otherwise the shelf sits crooked.

What part of this cold-rolled steel shelf with powder-coated finish will need replacement first under normal use?

The M6 mounting screws and cage nuts are the only serviceable hardware; the steel shelf itself has no moving parts and the powder coat resists rust, so hardware loosening from vibration is the typical maintenance point.

At what load does the 250 mm deep vented shelf hit its rated limit during continuous operation?

The shelf is rated for 50 LB maximum weight capacity; sustained loads at or near that figure will show deflection first, so keep equipment weight comfortably below the limit for long-term rigidity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.