PISKEKAT
PISKEKAT 500ft 14/2 AWG CL2 Speaker Wire White
500 ft CL2-rated 14 AWG speaker wire with 80-strand CCA conductors in a pull box for in-wall installs
- TypeOther
- Two conductors carry clean stereo signals
- 80 strands of 0.16 mm per conductor boost flexibility
- 14 AWG thickness handles longer runs
- Copper-clad aluminium keeps weight and cost down
- 500 ft pull box simplifies in-wall installation
PISKEKAT 500ft 14/2 AWG CL2 Speaker Wire
This 500ft speaker wire uses two 14 AWG conductors built from 80 strands of 0.16 mm copper-clad aluminium. It is supplied in a pull box for easy handling during DIY or professional audio installations in homes, cars or offices.
Check your installation needs before ordering
Verify that a CL2-rated cable meets local building codes for in-wall runs. Confirm that a two-conductor layout suits your speaker configuration and that the 14 AWG gauge matches the distance and power requirements of your system.
Thermals noise and power draw
As a passive copper-clad aluminium cable it generates no heat and produces no audible noise. Power handling is determined by the connected amplifier and speaker load rather than by the wire itself.
Highlights
- Two conductors carry clean stereo signals
- 80 strands of 0.16 mm per conductor boost flexibility
- 14 AWG thickness handles longer runs
- Copper-clad aluminium keeps weight and cost down
- 500 ft pull box simplifies in-wall installation
Specifications
| Type | Other |
|---|
Questions about this item
What comes in the box and what else do I need to buy?
The box contains a 500 ft pull-box of white CL2-rated speaker wire with two 14 AWG conductors. You will need to supply your own connectors, wall plates or banana plugs for termination.
How do I decide which gauge or length to choose?
This listing is a single 500 ft reel of 14 AWG wire; choose it when you need long runs for in-wall or whole-home audio. For shorter runs or higher power you would select a thicker gauge, but that is a separate product.
What does the 14 AWG rating mean once the wire is installed?
Each conductor uses 80 strands of 0.16 mm copper-clad aluminium, giving a 14 AWG cross-section that handles typical home-speaker loads over the full 500 ft length with acceptable resistance.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



