We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 1U 19-inch vented rack shelves 14 inches deep

PISKEKAT

PISKEKAT 2PCS 1U 19" Vented Rack Shelf 14" 35CM Depth Black

SKU CH-NNEP-FW6C2

Two 1U vented cantilever shelves for 19" racks, 35 cm deep, made from 2.0 mm SPCC steel with mounting hardware included

  • TypeOffice Machines - Multifunctional
  • Universal fit for 19 inch racks holds IT and stereo gear
  • Vented steel tray moves heat away from mounted devices
  • Cold-rolled SPCC steel at 2.0 mm thickness supports heavy equipment
  • Two shelves with screws and cage nuts install in minutes
  • 35 cm depth suits 14 inch deep network hardware

Universal 19" Rack Shelf Pair

This two-piece set fits every standard 19-inch rack or cabinet and is built for IT, data-network and stereo gear. Each tray measures 35 cm deep and occupies only 1U of vertical space. The black SPCC cold-rolled steel construction is 2.0 mm thick for rigidity. Mounting screws and cage nuts are included in the box.

Sustained Thermal Behaviour

The vented surface continuously moves air through the tray so heat from network switches, servers or audio units escapes instead of building up during long operating periods. Steady airflow keeps internal component temperatures lower than a solid shelf would allow. The 2.0 mm steel resists sagging even when fully loaded for months at a time. Equipment stays cooler and lasts longer under constant duty.

Pre-Installation Checklist

Verify that your rack or cabinet follows the 19-inch mounting standard and offers at least 1U of free height. Confirm the usable depth is no less than 13.8 cm so the tray seats properly. Ensure the combined weight of your devices does not exceed the shelf's rated capacity. Have a Phillips screwdriver ready for the supplied screws and cage nuts.

Highlights

  • Universal fit for 19 inch racks holds IT and stereo gear
  • Vented steel tray moves heat away from mounted devices
  • Cold-rolled SPCC steel at 2.0 mm thickness supports heavy equipment
  • Two shelves with screws and cage nuts install in minutes
  • 35 cm depth suits 14 inch deep network hardware

Specifications

TypeOffice Machines - Multifunctional

Questions about this item

How well does the 14 inch vented shelf move heat away from equipment running continuously?

The perforated steel surface lets air pass through the 13.8 cm depth, so warm air rises out of the cabinet instead of pooling around the gear.

What rack hardware must I already have to bolt these shelves in place?

You need a standard 19 inch rack or cabinet with square or threaded mounting holes; the pack supplies screws and cage nuts.

Will the 1.78 cm tall tray clear older 1U devices mounted directly above or below it?

Yes, the shelf occupies exactly 1U of vertical space, leaving the adjacent U positions free for legacy equipment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.