PISKEKAT
PISKEKAT 20 Feet Inflatable Movie Screen office equipment
A 20-foot inflatable projection screen with front and rear viewing, 160° angle, 16:9 ratio, and a 110 V 250 W blower that inflates it in two minutes
- TypeOffice Machines - Multifunctional
- Front and rear projection supported with a 160° viewing angle
- 16:9 aspect ratio delivers high colour fidelity
- 210D Oxford cloth frame is seam-free and washable
- Included 250 W blower inflates the screen in 2 minutes
- Carry bag and tether kit enable quick outdoor setup
Screen size and projection modes
The PISKEKAT inflatable movie screen measures 20 feet diagonally and supports both front and rear projection. A 160° viewing angle and 16:9 aspect ratio maintain picture clarity from multiple positions. The design allows projector placement on the opposite side so foot traffic does not interrupt the image.
Inflation speed and blower noise
An included 110V 250W blower inflates the screen in approximately 2 minutes and runs continuously during use. The manufacturer states the 180W external blower becomes hardly noticeable once the movie starts, providing a quiet viewing environment. The zipper must be closed before inflation begins.
Frame material and storage accessories
The black frame uses 210D Oxford cloth with a seam-free construction intended for durability across seasons. The polyester screen surface resists creasing after folding and is washable for easy maintenance. A carry bag, tethers and yard stakes are bundled for transport and secure outdoor setup.
Highlights
- Front and rear projection supported with a 160° viewing angle
- 16:9 aspect ratio delivers high colour fidelity
- 210D Oxford cloth frame is seam-free and washable
- Included 250 W blower inflates the screen in 2 minutes
- Carry bag and tether kit enable quick outdoor setup
Specifications
| Type | Office Machines - Multifunctional |
|---|
Questions about this item
How do I set up the 20-foot inflatable screen and what is the step people forget?
Connect the included 250 W blower to 110 V power, zip the frame zipper fully closed, then inflate for about 2 minutes; forgetting to zip first lets air escape and the screen will not hold shape.
What ongoing care does the 210D Oxford cloth frame and polyester screen need?
The material is washable and crease-resistant; wipe or hose off dirt, dry thoroughly before packing into the carry bag, and check tether points and stakes for wear each season.
What limits continuous outdoor use of the blower-inflated screen?
The 180 W external blower must stay plugged in to maintain pressure, so a reliable 110 V supply is required; extended wind or rain exposure can stress tethers and stakes before the fabric itself degrades.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



