We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PSU extension cable kit with 24-pin ATX, dual 8-pin EPS and three 8-pin PCIe connectors, 30 cm length

PISKEKAT

PISKEKAT 16AWG PSU Extension Cable Kit 24-Pin 2×8-Pin EPS 3×8-Pin PCIe 30cm Dual EPS Black

SKU CH-78J3-5JP2Z

A 16 AWG sleeved extension kit with a 24-pin ATX, two 8-pin EPS and three 8-pin PCIe cables, 30 cm long, for dual-CPU builds

  • TypeServer
  • Supports dual-CPU motherboards with two 8-pin EPS cables
  • Gold-plated terminals rated for over 15000 bend cycles
  • 16AWG UL1015 wire handles higher current without overheating
  • Includes cable combs for tidy routing on every connector
  • 30 cm length suits compact server chassis builds

Dual-CPU Power Extension Kit

This 16 AWG sleeved extension kit supplies one 24-pin ATX, two 8-pin EPS and three 8-pin PCIe connectors for dual-processor motherboards and multi-GPU builds. Gold-plated terminals are rated for 15000 bend cycles and UL1015 wiring supports higher current without overheating. The 30 cm length suits full-tower server chassis. Combs are included for tidy routing.

Build Quality and Daily Use

Each cable uses 16 AWG conductors with a higher copper content to reduce heat under heavy load. The gold-plated pins resist corrosion and extend connector life far beyond standard sleeved wires. Four combs per PCIe cable keep multiple GPU feeds aligned, while the dual EPS pair routes cleanly to side-by-side CPU sockets. Flexible sheathing eases tight bends behind motherboard trays.

Compatibility Checklist

Verify your power supply uses standard ATX pin-outs; the kit is tested with Corsair RM, RMx, HX and similar series units. Confirm the motherboard provides two 8-pin EPS headers and the graphics cards require 8-pin (6+2) PCIe power. Ensure 30 cm reach covers the distance from PSU to components in your specific chassis layout.

Highlights

  • Supports dual-CPU motherboards with two 8-pin EPS cables
  • Gold-plated terminals rated for over 15000 bend cycles
  • 16AWG UL1015 wire handles higher current without overheating
  • Includes cable combs for tidy routing on every connector
  • 30 cm length suits compact server chassis builds

Specifications

TypeServer

Questions about this item

What ATX connector standard does the 24-pin cable follow, and what current limit does the 16AWG wire impose?

The 24-pin cable follows the standard ATX 24-pin motherboard interface. The UL1015 16AWG wire supports higher current output to prevent overheating under load.

What clearance and mounting hardware are required for the 30cm cables and included combs?

Each cable is 30cm long and ships with four combs per PCIe cable for alignment. No proprietary brackets are needed; standard case routing channels accommodate the sleeved extensions.

How do I install the dual 4+4-pin EPS cables on a dual-CPU motherboard, and which step is often missed?

Connect each 4+4-pin EPS cable to its own CPU power header on the motherboard. The step often missed is seating both halves of each 4+4 connector fully before tightening the combs.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.