We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Braided brown-black PSU extension cables with 24-pin, dual 8-pin EPS and triple 8-pin PCIe connectors, 30cm length

PISKEKAT

PISKEKAT 16AWG Pro Sleeved Cable Kit 24Pin 2x8Pin 3x8Pin 30cm Dual EPS Brown-Black

SKU CH-9V5S-90KJQ

A 16AWG sleeved cable kit with 24-pin ATX, dual 8-pin EPS and three 8-pin PCIe extensions, 30 cm long, for dual-CPU motherboards

  • TypeServer
  • Dual EPS cables support twin-CPU motherboards
  • 16AWG UL1015 wire handles high current without heat
  • Gold-plated GPU terminals resist daily wear
  • Nylon braid plus four combs per cable prevent sag
  • 30 cm length keeps internal routing tidy

Dual-CPU cable kit

This PISKEKAT extension set is built for dual-CPU server motherboards that need extra reach from a modular power supply. It supplies one 24-pin ATX extension, two 4+4-pin EPS cables and three 8-to-6+2-pin PCIe cables. The 30 cm length suits compact rack chassis where stock cables fall short. Builders running single-CPU boards or needing longer runs should look elsewhere.

16AWG thermals and gold terminals

UL1015 16AWG conductors carry higher current without heating up under heavy server loads. Gold-plated PCIe terminals resist oxidation from repeated mating cycles. The nylon braid stays flexible in tight airflow paths, and supplied combs keep each cable flat to avoid blocking intake fans. No active cooling or fan noise is introduced by the kit itself.

Rack integration and clearance

Each cable plugs directly into existing modular PSU leads, so the power supply must already provide matching native connectors. The short 30 cm extensions free up slack that would otherwise crowd drive bays or backplane cages in 1U and 2U enclosures. Four combs per cable lock routing in place, reducing maintenance in vibration-prone rack environments.

Highlights

  • Dual EPS cables support twin-CPU motherboards
  • 16AWG UL1015 wire handles high current without heat
  • Gold-plated GPU terminals resist daily wear
  • Nylon braid plus four combs per cable prevent sag
  • 30 cm length keeps internal routing tidy

Specifications

TypeServer

Questions about this item

How do I install the 24-pin ATX extension and the dual 4+4-pin EPS cables without reversing the motherboard connectors?

Plug each extension into the matching modular PSU cable first, then route the 24-pin to the board's ATX socket and the two 4+4-pin EPS leads to the CPU power headers — the keyed plugs prevent reverse insertion.

What upkeep will the nylon-braided 16AWG cables and supplied combs require over time?

The braid and UL1015 16AWG wire are maintenance-free; simply reseat the four combs per cable if they shift during cleaning or hardware changes.

At what point does the 30 cm length become the limiting factor in a dual-CPU server build?

The fixed 30 cm reach limits routing in tall chassis or when the PSU mounts far from the motherboard, so measure the run before ordering.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.